Networker

Re: [Networker] Problem with staging to storage node

2005-04-08 14:54:54
Subject: Re: [Networker] Problem with staging to storage node
From: "Neild, Jim" <Jim.Neild AT SSHA.ON DOT CA>
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Date: Fri, 8 Apr 2005 14:45:05 -0400
I still have it scheduled on the NW server, but adding the Clone Storage
did the trick.

Cheers.

-----Original Message-----
From: Legato NetWorker discussion [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU]
On Behalf Of thierry.faidherbe AT HP DOT COM
Sent: April 8, 2005 11:15 AM
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Subject: Re: [Networker] Problem with staging to storage node


>Make sure that the storage nodes are listed in the storage nodes field 
>on the networker server.  Then you can restrict the pool that you are 
>staging to to devices on the storage nodes.

Not only : You must have all SN is server clone storage node affinity
list, having SN name listed in each SN's Clone storage node affinity.
and schedule nsrstage from each SN, not from the server.

I think it should work.

HTH,
Thierry

> Thanks Lee,
>
> Legato have had this call for a few days now :)
>
> Kevin
>
> -----Original Message-----
> From: Lee Hanel [mailto:lhanel AT rackspace DOT com]
> Sent: 08 April 2005 15:25
> To: Allan, Kevin; Legato NetWorker discussion
> Subject: Re: [Networker] Problem with staging to storage node
>
> Make sure that the storage nodes are listed in the storage nodes field

> on the networker server.  Then you can restrict the pool that you are 
> staging to to devices on the storage nodes.
>
>
> Lee
>
>
> On Fri, 2005-04-08 at 06:28 -0700, Allan, Kevin wrote:
>> I am currently in the process of setting up our first adv_file type
> devices
>> and staging policies but have hit a problem,
>>
>>
>>
>> We have one networker server and two storage nodes, each with local 
>> tape
> and
>> adv_file devices.
>>
>>
>>
>> I had hoped to configure the system so that all staging would be 
>> localised to the server in question, thus removing any network 
>> traffic during the staging process.
>>
>>
>>
>> I.E.
>>
>> Staging on the networker server would only use the local adv_file 
>> device
> and
>> stage to a local LTO drive.
>>
>> Staging on the storage node would only use the local adv_file device 
>> and stage to a local LTO drive.
>>
>>
>>
>> Unfortunately I cannot seem to get this working, all staging at the 
>> moment has to stage to a LTO device attached to the networker server.
>>
>> If I do not include a device from the networker server in the stage 
>> policy destination pool, I end up with the following error:
>>
>>
>>
>> 04/08/05 12:06:16 nsrd: media notice: no matching devices; check 
>> storage nodes, devices or pools for save of client `networker server'
>>
>> nsrstage: error, no matching devices; check storage nodes, devices or
> pools
>>
>> nsrstage: Cannot open nsrstage session with kirkbkp01
>>
>> nsrstage: Failed to clone any save sets
>>
>>
>>
>> I would appreciate any pointers.
>>
>>
>>
>> Regards,
>>
>> Kevin
>>
>>
>>
>>
>>
>>
>> --
>> Note: To sign off this list, send a "signoff networker" command via 
>> email to listserv AT listserv.temple DOT edu or visit the list's Web site at
>> http://listserv.temple.edu/archives/networker.html where you can
>> also view and post messages to the list. Questions regarding this
list
>> should be sent to stan AT temple DOT edu
>> =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
>
> --
> Note: To sign off this list, send a "signoff networker" command via 
> email to listserv AT listserv.temple DOT edu or visit the list's Web site at 
> http://listserv.temple.edu/archives/networker.html where you can also 
> view and post messages to the list. Questions regarding this list 
> should be sent to stan AT temple DOT edu 
> =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
>

--
Note: To sign off this list, send a "signoff networker" command via
email to listserv AT listserv.temple DOT edu or visit the list's Web site at
http://listserv.temple.edu/archives/networker.html where you can also
view and post messages to the list. Questions regarding this list should
be sent to stan AT temple DOT edu
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=

--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listserv.temple DOT edu or visit the list's Web site at
http://listserv.temple.edu/archives/networker.html where you can
also view and post messages to the list. Questions regarding this list
should be sent to stan AT temple DOT edu
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=

<Prev in Thread] Current Thread [Next in Thread>