Re: [Networker] Red Hat Adaptec driver

I'v used the 6.3.9 driver from adaptec for 3 months now. Most scsi-bus
reset and errors (that I hav with 6.2.36) has gone. Another thing to do
is to disable CDI on the jukebox-devices.
You can download the source-code for the 6.3.9 driver from adaptec and
the make the driver to the latest kernel (I.m running RHEL Es. V3u4
kernel 2.4.21-27.Elsmp). Remember to make a new initrd image otherwise
you will get the old driver at boot.
P.s. You can also ger the source-code for 2.6 kernel so you are able to
run on RHEL ESv4
Carl Bergmann
Risoe Nat. Lab
DK

-----Original Message-----
From: Dave Mussulman [mailto:mussulma AT CS.UIUC DOT EDU] 
Sent: 6. april 2005 18:43
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Subject: Re: [Networker] Red Hat Adaptec driver


On Tue, Apr 05, 2005 at 09:05:06AM -0600, Librado Pamintuan wrote:
> Hello all,
> 
> The new driver for the Adapter 39160 (v6.3.9) is now available on 
> Adaptec website. There are several rpm package available for various 
> release of Red Hat.
> 
> Question is:
> Did someone already used and applied this driver? are there any 
> improvement or does it poses new problems/errors?
> 
> In particular, I'm running Red Hat ES 3 on Linux O/S (Intel server), 
> Legato NetWorker v7.1.2

There were some recent posts (maybe January 2005?) about this driver.
I'm running it in the same environment and versions as you, and am not
having any problems.  The latest kernel it supports is 2.4.21-4, which
is not the latest available, but it works.

I was having problems with the adaptec driver that ships with RHEL AS 3
-- timeouts and bus errors.  When I upgraded to the 6.3.9 version, my
problems went away.

Dave

--
Note: To sign off this list, send a "signoff networker" command via
email to listserv AT listserv.temple DOT edu or visit the list's Web site at
http://listserv.temple.edu/archives/networker.html where you can also
view and post messages to the list. Questions regarding this list should
be sent to stan AT temple DOT edu
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=

--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listserv.temple DOT edu or visit the list's Web site at
http://listserv.temple.edu/archives/networker.html where you can
also view and post messages to the list. Questions regarding this list
should be sent to stan AT temple DOT edu
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=