Just remembered. You can do a 'mount/system' if you want to make it
available to ALL users of the system, not just the current process.
-----Original Message-----
From: Legato NetWorker discussion [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU]
On
Behalf Of Werth, Dave
Sent: Monday, January 24, 2005 3:00 PM
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Subject: Re: [Networker] Installing Legato on VMS
Yes, that is correct. In my rustiness I missed that he wasn't in the
[000000] directory. Thanks for the clarification.
Dave
David Werth
Garmin AT, Inc
(formerly: UPS Aviation Technologies)
(formerly: II Morrow)
Salem, Oregon
dave.werth AT garmin DOT com
-----Original Message-----
From: rdoering AT comcast DOT net [mailto:rdoering AT comcast DOT net]
Sent: Monday, January 24, 2005 11:55 AM
To: Legato NetWorker discussion; Werth, Dave; NETWORKER AT LISTSERV.TEMPLE DOT
EDU
Subject: Re: [Networker] Installing Legato on VMS
It looks to me like he has the drive mounted properly.
For the set default command, use "set def TEST1$DQA0:[000000]"
Then the "dir" command will show you the files there.
Randy
-------------- Original message --------------
> Dave,
>
> I think the problem with getting a 'DIR' is that you probably have the CD
> mounted as a tape device rather than a file device. It's been a while
since
> I have worked much with VMS but I think the command you want is
> 'MOUNT/OVERRIDE=IDENTIFICATION' to get it mounted as a file type device.
>
> Also, IIRC if the drive is 'Mounted allocated' you can only access it from
> the process that mounted it.
>
> So, what I think would work is this:
>
> $ DISMOUNT/NOUNLOAD TEST1$DQA0:
> $ MOUNT/OVERIDE=ID TEST1$DQAO:
>
> Hope this helps, Dave.
>
> David Werth
> Garmin AT, Inc
> (formerly: UPS Aviation Technologies)
> (formerly: II Morrow)
> Salem, Oregon
> dave.werth AT garmin DOT com !
>
> -----Original Message-----
> From: Dave Martini [mailto:e571694 AT MAIL.LLNL DOT GOV]
> Sent: Monday, January 24, 2005 11:07 AM
> To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
> Subject: [Networker] Installing Legato on VMS
>
> I'm installing Networker 7.1 onto OpenVMS.
> My knowledge of VMS is limited.
> I have the CD in the drive and mounted it.
>
> But I can't figure out how to cd into the cdrom directory that contains
> the networker files.
> Can someone provide me with the correct commands.
> The install guide for networker for VMS is not real helpful.
>
> Do I type
> $@sys$update:vmsinstall
>
> But what is the product name? I suppose a dir on the cd would give me
that.
>
> David Martini
> LLNL
>
>
> The CD is device DQA0:
>
>
> $ show dev d
>
> Device Device Error Volum! e Free
> Trans Mnt
> Name Status Count Label
> Bl ocks Count Cnt
> TEST1$DKB0: Mounted 0 ALPHASYS
> 9710100 470 1
> TEST1$DQA0: Mounted alloc 0 NETWORKER_VO
> 0 1 1
> wrtlck
> TEST1$DQA1: Online 1
> TEST1$DQB0: Online 1
> TEST1$DQB1: Online 1
> TEST1$DVA0: Online 0
> $
> $
> $ set default $DQA0:
> $ dir
> %DIRECT-E-OPENIN, error opening $DQA0:[SYSMGR]*.*;* as input
> -RMS-F-DEV, error in device name or inappropriate device type for
operation
> $ show default
> $DQA0:[SYSMGR]
> %DCL-I-INVDEF, $DQA0:[SYSMGR] does not exist
> $
>
> --
> Note: To sign off this list, send a "signoff networker" command via email
> to listserv AT listserv.temple DOT edu or visit the list's Web site at
> http://listserv.temple.edu/archives/networker.html where you can
> also view and post messages to the list. Questions regarding this list
> should be sent to stan AT temple DOT edu >
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
>
>
> -------------------------
> This e-mail and any attachments may contain confidential material for the
sole
> use of the intended recipient. If you are not the intended recipient,
please be
> aware that any disclosure, copying, distribution or use of this e-mail or
any
> attachment is prohibited. If you have received this e-mail in error,
please
> contact the sender and delete all copies.
> Thank you for your cooperation
>
> --
> Note: To sign off this list, send a "signoff networker" command via email
> to listserv AT listserv.temple DOT edu or visit the list's Web site at
> http://listserv.temple.edu/archives/networker.html where you can
> also view and post messages to the list. Questions regarding this list
> should be sent to stan AT temple DOT edu
> =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*! =*=*=*=*=*=*=*=*=*=*=*=
--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listserv.temple DOT edu or visit the list's Web site at
http://listserv.temple.edu/archives/networker.html where you can
also view and post messages to the list. Questions regarding this list
should be sent to stan AT temple DOT edu
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listserv.temple DOT edu or visit the list's Web site at
http://listserv.temple.edu/archives/networker.html where you can
also view and post messages to the list. Questions regarding this list
should be sent to stan AT temple DOT edu
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
|