when we upgraded to x2k3 we had to change the savesets and this is the
syntax legato had us use. i believe we also had the syntax you currently
have when we were backing up x5.5. the fact that your backups were
working after the initial upgrade and prior to migrating public folders
is somewhat troubling though.
michael brooks ........... michaelb AT sequoiains DOT com
Network Administrator .... 831.657.4539 (phone)
Sequoia Insurance ........ 831.657.4512 (fax)
"Flying is learning how to throw yourself at the ground and miss"
________________________________
From: Dell, Mary [mailto:mdell AT mesirowfinancial DOT com]
Sent: Thursday, December 23, 2004 12:54 PM
To: 'Legato NetWorker discussion'; Michael Brooks
Subject: RE: MSEXCH Failing
My setup on a unix server has the save sets as:
MSEXCH:IS
MSEXCH:DS
and I use "nsrxchsv.exe" in the "backup command" field rather than
leaving it blank.
Then I set up a second client setup with the same name, and all the
local save sets
C:\
D:\
SYSTEM STATE:\
SYSTEM DB:\
SYSTEM FILES:\
and I leave the backup command field blank. I also run them in
different backup windows, to avoid potential conflicts.
seems to work on exchange 5.5 anyway.
-----Original Message-----
From: Legato NetWorker discussion [mailto:NETWORKER AT LISTMAIL.TEMPLE DOT EDU]
On Behalf Of Michael Brooks
Sent: Thursday, December 23, 2004 9:38 AM
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Subject: Re: MSEXCH Failing
in the "save set" field (we are a windows environment - unix may differ)
of the client, you need:
MSEXCH: for the databases, and
MSEXCH:MB for mailboxes
hope this gets you going again
michael brooks ........... michaelb AT sequoiains DOT com
Network Administrator .... 831.657.4539 (phone)
Sequoia Insurance ........ 831.657.4512 (fax)
"Flying is learning how to throw yourself at the ground and miss"
-----Original Message-----
From: Legato NetWorker discussion [mailto:NETWORKER AT LISTMAIL.TEMPLE DOT EDU]
On Behalf Of Tim Aitken
Sent: Wednesday, December 22, 2004 6:01 PM
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Subject: [Networker] MSEXCH Failing
Hello all,
Two days ago our backups on our Exchange 2003 server stopped working. We
have recently installed Exchange 2003 on a Windows 2003 box. The night
the first backup failed we were migrating our public folders from the
5.5 server to the new 2003 server. The 5.5 server wasn't being backed up
as we were using it's licence to backup the 2003 server (this had been
working for a about a week). I can successfully make a backup is I start
it from the client software on Exchange, it is the groups that is
failing.
This is the log of the attempted backup
Dec 23 12:37:48 backup_server: NetWorker savegroup: (info) starting
msexchange (with 1 client(s)) Dec 23 12:39:11 backup_server: NetWorker
savegroup: (alert) msexchange completed, total 1 client(s), 0
Hostname(s) Unresolved, 1 Failed, 0 Succeeded. (exch-s01 Failed)
Dec 23 12:39:11 backup_server: Start time: Thu Dec 23 12:37:47 2004
Dec 23 12:39:11 backup_server: End time: Thu Dec 23 12:39:11 2004
Dec 23 12:39:11 backup_server: --- Unsuccessful Save Sets --- Dec 23
12:39:11 backup_server: * exch-s01:SYSTEM STATE:\ 1 retry attempted Dec
23 12:39:11 backup_server: * exch-s01:SYSTEM STATE:\ nsrxchsv_ese.exe
Version: 4.0.0.44 Supporting Exchange 2000 and Exchange 2003 Dec 23
12:39:11 backup_server: * exch-s01:SYSTEM STATE:\ System Version:
5.2 Build 3790
Dec 23 12:39:11 backup_server: * exch-s01:SYSTEM STATE:\ ESEBCLI2.DLL
Version: 6.5.6944.0
Dec 23 12:39:11 backup_server: * exch-s01:SYSTEM STATE:\ Performing an
Exchange save operation; save level is Full (Legato Backup Level: full).
Dec 23 12:39:11 backup_server: * exch-s01:SYSTEM STATE:\ Parsing
parameters from the command line Dec 23 12:39:11 backup_server: *
exch-s01:SYSTEM STATE:\ xchutil(996):
Invalid application name SYSTEM STATE:\
Dec 23 12:39:11 backup_server: * exch-s01:SYSTEM STATE:\ Error parsing
parameter: SYSTEM STATE:\
Dec 23 12:39:11 backup_server: * exch-s01:SYSTEM STATE:\ Backup
operation finished with errors.
Dec 23 12:39:11 qbackup_server: * exch-s01:MSEXCH:\ 1 retry attempted
Dec 23 12:39:11 backup_server: * exch-s01:MSEXCH:\ nsrxchsv_ese.exe
Version: 4.0.0.44 Supporting Exchange 2000 and Exchange 2003 Dec 23
12:39:11 backup_server: * exch-s01:MSEXCH:\ System Version: 5.2 Build
3790 Dec 23 12:39:11 backup_server: * exch-s01:MSEXCH:\ ESEBCLI2.DLL
Version:
6.5.6944.0
Dec 23 12:39:11 backup_server: * exch-s01:MSEXCH:\ Performing an
Exchange save operation; save level is Full (Legato Backup Level: full).
Dec 23 12:39:11 backup_server: * exch-s01:MSEXCH:\ Parsing parameters
from the command line Dec 23 12:39:11 backup_server: * exch-s01:MSEXCH:\
xchutil(1184): Bad
argument(s)
Dec 23 12:39:11 backup_server: * exch-s01:MSEXCH:\ Error parsing
parameter:
MSEXCH:\
Dec 23 12:39:11 backup_server: * exch-s01:MSEXCH:\ Backup operation
finished with errors.
Dec 23 12:39:11 backup_server: --- Successful Save Sets ---
Dec 23 12:39:11 backup_server: backup_server: index:exch-s01
level=full,
19 KB 00:00:56 5 files
I hope i have included enough info for someone to point me in the right
direction because I haven't been able to find any info through google
that helps.
Thanks
Tim Aitken
--
Note: To sign off this list, send a "signoff networker" command via
email to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can also
view and post messages to the list. Questions regarding this list should
be sent to stan AT temple DOT edu
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
--
Note: To sign off this list, send a "signoff networker" command via
email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list. Questions regarding this list
should be sent to stan AT temple DOT edu
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
This communication may contain privileged and/or confidential
information. It is intended solely for the use of the addressee. If you
are not the intended recipient, you are strictly prohibited from
disclosing, copying, distributing or using any of this information. If
you received this communication in error, please contact the sender
immediately and destroy the material in its entirety, whether electronic
or hard copy. Confidential, proprietary or time-sensitive communications
should not be transmitted via the Internet, as there can be no assurance
of actual or timely delivery, receipt and/or confidentiality. This is
not an offer, or solicitation of any offer to buy or sell any security,
investment or other product.
--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list. Questions regarding this list
should be sent to stan AT temple DOT edu
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
|