Networker

Re: [Networker] Kernel panic working with Dell Power Edge 2800 and Dell PV136T(adic100)library

2004-11-29 03:22:51
Subject: Re: [Networker] Kernel panic working with Dell Power Edge 2800 and Dell PV136T(adic100)library
From: David De Maeyer <ddm AT RUC DOT DK>
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Date: Mon, 29 Nov 2004 09:21:52 +0100
Hi Carl,

This sounds very much like you have problem with your (or one of yours)
ADAPTEC SCSI controller. But I guess you probably already spotted that.
That the media database can't be repaired probably indicates that the
SCSI transport is corrupted. Have you checked the controller(s)? Can
you access the devices? Have you checked the cables? The SCSI chain
length?

Regards,
David

________________________________________________________
David De Maeyer
Roskilde University Center, Department of Computer Science
Box 260, Hus 42.1, 4000 Roskilde, Denmark
voice (+45) 46 74 38 29 mobile (+45) 27 24 60 77 fax (+45) 46 74 30 72




On 27 Nov 2004, at 12:18, carl.bergmann AT RISOE DOT DK wrote:

Kernel panic working with Dell Power Edge 2800 and Dell
PV136T(adic100)library.

I have problems with my new backupserver. When I work with the library
I sometimes
get a dump Kernel panic:Fatal exception  on the server. The
screen-dump talks about aic7xxx and some scsi-mod commands. At the
same time the networker  media-database (mm) i corupted and it can't
be repaired.

Environment:
Server Dell Power Edge 2800 with 4 Gb memory and 4 2-channel adaptec
scsi-controllers.
The server is running Red Hat Enterprise Linux ES release 3 (Taroon
Update 3)
Kernel is 2.4.21-20.EL #1 SMP Wed Aug 18 20:34:58 EDT 2004 x86_64
x86_64 x86_64 GNU/Linux
The library is a Dell PV136T with 6 LTO-2 drives, each connected to
it's own scsi-port.
Some output from dmesg

<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
scsi0:0:0:0: Cmd aborted from QINFIFO
aic7xxx_abort returns 0x2002
st6: Failed to read 65536 byte block with 32768 byte read.
st6: Failed to read 65536 byte block with 32768 byte read

Could it be some of the setings on the jukebox that should be changed?
Have anyone seen something familiar.
Any help would be appreciated.

Carl Bergmann
Risoe Nat. Lab.
Dk

--
Note: To sign off this list, send a "signoff networker" command via
email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list. Questions regarding this list
should be sent to stan AT temple DOT edu
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=

--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list. Questions regarding this list
should be sent to stan AT temple DOT edu
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=

<Prev in Thread] Current Thread [Next in Thread>