Hi Michael

No you can't. The indexes will always be saved by the NetWorkerserver itself. 
Also, you can't remove the value "nsrserverhost" at the storage node field in 
the client recource for the NetWorker server.

regards
Klasu
> -----Ursprüngliche Nachricht-----
> Von: Legato NetWorker discussion 
> [mailto:NETWORKER AT LISTMAIL.TEMPLE DOT EDU] Im Auftrag von 
> Ballinger, John M
> Gesendet: Montag, 18. Oktober 2004 23:39
> An: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
> Betreff: [Networker] Can we direct client-file indexes saved 
> to a tape on a storage node other than networker server
> 
> 
> Can we configure to have the client-file indexes save to a 
> storage node
> other than NetWorker server.
> Do we just change the target storage node for the networker 
> server to be
> some other storage node ?
> 
> Thanks - John
> 
> -----Original Message-----
> From: Legato NetWorker discussion 
> [mailto:NETWORKER AT LISTMAIL.TEMPLE DOT EDU]
> On Behalf Of Michael Coxe
> Sent: Monday, October 18, 2004 2:28 PM
> To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
> Subject: [Networker] What's wrong with my SKIP directive?
> 
> 
> I have a 1.4TB filesystem with several large subdirectories
> and lots of smaller subdirectories. I split off the 4 large
> subdirectories into their own client/group, and in the top level
> directory backup placed the following directive to ignore the 4 large
> subdirectories.
> 
> The root directory is /vol/vol0/home/buildusr:
> 
> I first tried the following, per the NW documentation, which 
> didn't work
> - i.e., everything was backed up:
> 
>    directive:\
>    "<< /vol/vol0/home/buildusr >>
>          skip: builds
>          skip: distributions
>          skip: distributions-test
>          skip: shipments";
> 
> Then, after reading suggestions from the Networker archives I tried
> this, which doesn't appear to work either:
> 
>    directive:\
>    "<< /vol/vol0/home/buildusr/builds >>
>          skip:  * .?*
>    << /vol/vol0/home/buildusr/distributions >>
>          skip:  * .?*
>    << /vol/vol0/home/buildusr/distributions-test >>
>          skip:  * .?*
>    << /vol/vol0/home/buildusr/shipments >>
>          skip   * .?*";
> 
> 
> What am I doing wrong? What's the right way to ignore/skip backing up
> these 4 directories?
> 
> 
>   - michael
> 
> --
>    Michael Coxe, IT
>    <mcoxe AT opsware DOT com>
>    work (408) 744-7582
>    cell (408) 898-7011
> 
> --
> Note: To sign off this list, send a "signoff networker" command via
> email to listserv AT listmail.temple DOT edu or visit the list's Web site at
> http://listmail.temple.edu/archives/networker.html where you can also
> view and post messages to the list. Questions regarding this 
> list should
> be sent to stan AT temple DOT edu
> =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
> 
> --
> Note: To sign off this list, send a "signoff networker" 
> command via email
> to listserv AT listmail.temple DOT edu or visit the list's Web site at
> http://listmail.temple.edu/archives/networker.html where you can
> also view and post messages to the list. Questions regarding this list
> should be sent to stan AT temple DOT edu
> =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
> 

--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list. Questions regarding this list
should be sent to stan AT temple DOT edu
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=