Re: [Networker] NDMP backup fails after one drive is removed from jukebox
2004-09-20 13:56:36
On Mon, 20 Sep 2004, Joel Krajden wrote:
>Solaris 9/Networker7.1; NetApp running 6.5.2R1, Qualstar 8464 with 4 LTO
>drives.
>
>The Solaris 9/Networker7.1 server controls the jukebox robotics and two
>drives. Two drives in the jukebox are connected over SCSI to the NetApp.
>Backups for the NetApp are over NDMP.
>
>Last week one of the drives on the NetApp failed. The drive was removed and
>the entry in the jukebox for that drive was set to disabled. The entry for
>Networker for that drive was also set to disabled (taken out of service mode).
>
>Tried to do backups from the NetApp using the remaining drive but just got
>messages about terminating on signal 11 each time the remianing drive was
>accessed.
When you removed that tape drive, did you put a SCSI terminator on the
SCSI bus to make up for the missing tape drive? If not, that might
be the cause of your tape drive problem.
--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
|
|
|