Shawn,

Where are you using "compressasm" with disk ?
At client via directives or server ?

Thanks - John

-----Original Message-----
From: Legato NetWorker discussion [mailto:NETWORKER AT LISTMAIL.TEMPLE DOT EDU]
On Behalf Of Shawn Cox
Sent: Friday, September 10, 2004 12:15 PM
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Subject: Re: [Networker] Backup to disk


I have 2 500GB Disk Devices on a dual pathed 2GB CX600.  I get 25-30
mb/sec reads when staging to LTO2 tape.  I can get the same speed with
writes if I throw enough streams at it.  My setup is well documented in
the NETWORKER-L archives if you want details.  Also consider the
compressasm can have tremendous inmapcts on the throughput depending
upon the files being backed up.

--Shawn

----- Original Message -----
From: "Arun Sondhi" <asondhi AT RA.ROCKWELL DOT COM>
To: <NETWORKER AT LISTMAIL.TEMPLE DOT EDU>
Sent: Friday, September 10, 2004 2:00 PM
Subject: Re: [Networker] Backup to disk


> John,
>
> What is the size of your disk device, and what speeds are you seeing? 
> Ours is Networker 7.1.1 on Clarion CX700 on 1GB LAN and SAN connected,

> but the data rates are less than what we see on Tapes...
>
> Legato is providing a Hotfix.
>
> Sincerely,
>
> Arun Sondhi
>
> Ph  : +1 414.382.0206
> Pg  : +1 414.341.8650
> Mo : +1 414.213.1540
> Extn: 20206
>
>
>
>
> "Ballinger, John M" <john.ballinger AT PNL DOT GOV>
> Sent by: Legato NetWorker discussion <NETWORKER AT LISTMAIL.TEMPLE DOT EDU> 
> 09/10/2004 01:11 PM Please respond to Legato NetWorker discussion; 
> Please respond to "Ballinger, John M"
>
>
>        To:     NETWORKER AT LISTMAIL.TEMPLE DOT EDU
>        cc:
>        Subject:        Re: [Networker] Backup to disk
>
>
> Shawn,
>
> I assume you're talking about the NetWorker adv_disk media choice ?? 
> We use that now and it works just fine.
>
> thanks - John
>
> -----Original Message-----
> From: Legato NetWorker discussion 
> [mailto:NETWORKER AT LISTMAIL.TEMPLE DOT EDU]On Behalf Of Shawn Cox
> Sent: Friday, September 10, 2004 9:15 AM
> To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
> Subject: Re: [Networker] Backup to disk
>
>
> Indeed.  You'll need to purchase the DBO module.  Very handy.
>
> http://www.legato.com/products/networker/diskbackup.cfm
>
> --Shawn
>
>
> ----- Original Message -----
> From: "Somen Chanda" <schanda AT NETJETS DOT COM>
> To: <NETWORKER AT LISTMAIL.TEMPLE DOT EDU>
> Sent: Friday, September 10, 2004 11:06 AM
> Subject: [Networker] Backup to disk
>
>
>> Hi,
>>
>> Does anyone know if we can backup to disk using Legato and then to 
>> tape? If anyone has a similar existing configuration could you please

>> let me know how it is setup.
>>
>> Thanks
>>
>> Somen
>>
>> --
>> Note: To sign off this list, send a "signoff networker" command via
> email
>> to listserv AT listmail.temple DOT edu or visit the list's Web site at 
>> http://listmail.temple.edu/archives/networker.html where you can also

>> view and post messages to the list. 
>> =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
>>
>
> --
> Note: To sign off this list, send a "signoff networker" command via 
> email to listserv AT listmail.temple DOT edu or visit the list's Web site at 
> http://listmail.temple.edu/archives/networker.html where you can also 
> view and post messages to the list. 
> =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
>
> --
> Note: To sign off this list, send a "signoff networker" command via 
> email to listserv AT listmail.temple DOT edu or visit the list's Web site at 
> http://listmail.temple.edu/archives/networker.html where you can also 
> view and post messages to the list. 
> =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
>
>
>
> --
> Note: To sign off this list, send a "signoff networker" command via 
> email to listserv AT listmail.temple DOT edu or visit the list's Web site at 
> http://listmail.temple.edu/archives/networker.html where you can also 
> view and post messages to the list. 
> =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
>

--
Note: To sign off this list, send a "signoff networker" command via
email to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can also
view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=

--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=