[Networker] NW Cluster Volumes not seen
2004-08-30 13:09:25
Greetings,
We have a four-node NetWare 6.5 cluster. Each node mounts one or more
clustered volumes. With service pack 1b and using TSAFS, we had some
memory issues. Last week we upgraded to SP2 and back-revved to
TSA600.nlm (6.00.09 3/26/04 from tsa5up15).
Since then networker only sees one of six clustered volumes. It sees the
(local) sys volumes for each cluster node, and it sees multiple volumes
on non-clustered servers. A savegrp probe only finds the sys volume. If
I try a manual backup from the NetWare console, I also only see one of
the six clustered volumes.
I had checked 'Disable Cluster' in iManager when running TSAFS. I have
tried it checked and unchecked with TSA600 without luck. We are aware
that Networker is not cluster-aware.
Any ideas?
ajs
--
Tony Skalski
Systems Administrator
507-646-3227
ajs AT stolaf DOT edu
-------------------------------------------------------
St. Olaf College 1510 St. Olaf Avenue
Information and Northfield, MN
Instructional Technologies 55057-1097
=======================================================
--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- [Networker] NW Cluster Volumes not seen,
Tony Skalski <=
|
|
|