Re: [Networker] loading volules from CAP

Here's what we typically do:

nsrjb -d -P1-18   (this deposits media from the first 18 slots in the
I/O drawer.)

Now, if the media is already in the media index that's all there is to
it. If not, then you're going to have to inventory the new slots and
unless you were watching you have no idea which slots were used. Under
this scenario you probably would want to specify the slot range for the
deposit. Such as, nsrjb -d -P1-18 -S66-83.

-Bob

-----Original Message-----
From: Legato NetWorker discussion [mailto:NETWORKER AT LISTMAIL.TEMPLE DOT EDU]
On Behalf Of Gerrit Sere
Sent: Thursday, August 26, 2004 8:33 AM
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Subject: [Networker] loading volules from CAP


Hi,

We did an upgrade from Networker 5.5 to Networker 6.1A20 Power/185.

The problem is that loading volumes from the CAP to the silo won't work.

In Networker 5.5 we did :

nsrjb -d -P I01

and the volumes were loaded.

We could do something like this :

nsrjb -d -P I01 -T M05673
and then we must do
nsrjb -I -S 200

but doing this for 200 tapes is a nighmare

The error messages is:

root@buux1 # nsrjb -d -P I01
nsrjb: error, range can not have a Zero in it.
root@buux1 #

root@buux1 # nsrjb -d -P 1
nsrjb: Jukebox error:  Thu 15:28:52 some specified slots loaded.

and no volumes are loaded


Thx,
Regards,
Gerrit

--
Note: To sign off this list, send a "signoff networker" command via
email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=

--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=