Networker

Re: [Networker] Problem - NW 7.0 working Silo Storagetek 9310

2004-07-22 10:05:41
Subject: Re: [Networker] Problem - NW 7.0 working Silo Storagetek 9310
From: "Rohrich, James" <James.Rohrich AT UOP DOT COM>
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Date: Thu, 22 Jul 2004 08:49:49 -0500
You may need to contact Legato. I ran into problems with 7.1.1 and ACSLS
6.0.1. You will likely need to replace a couple Legato modules to work
correctly with ACSLS.

-----Original Message-----
From: Legato NetWorker discussion
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Sent: 7/22/04 8:46 AM
Subject: [Networker] Problem -  NW 7.0 working Silo Storagetek 9310

Hi there,

I'm trying configure my backup environment:

NetWorker Server 7.0
Windows Srv Adv 2000
FC Qlogic QLA23XX
Silo STK 9310 Powderhorn
4 drivers 9840
ACSLS 6.1.1
LibAttach 1.1


Licenses for NW 7.0, Silo Module, DDS and Dedicated SN, are OK !

I installed my NW Server, used jbconfig, my "autochanger" was
configured.

Seemingly, all rigth.

But when I try to mount / umount / inventory or label my 'volumes', the
NW
not work properly. To return this error:

Jul 21 16:17:22 wtrjo007: attribute in the device resource.
Jul 21 16:17:22 wtrjo007: NetWorker media: (warning) \\.\Tape1 reading:
read
open error: drive status is The drive is not ready and the reason is not
known
Jul 21 16:17:23 wtrjo007: NetWorker media: (info) Library `CLU6000'
resource
is out of sync: attempting to adjust drive `\\.\Tape1' status to: loaded
with volume from slot unknowm
Jul 21 16:50:03 wtrjo007: NetWorker media: (warning) \\.\Tape2 opening:
DRIVE_STATUS_NOT_READY_UNK
Jul 21 16:50:03 wtrjo007: NetWorker device disabled: (warning) Device
\\.\Tape2 is automatically disabled.


I don't know what's happening !

Anyone help me ?

Sorry my english, it's same my "NetWorker" = don't work properly !

:o)

Thank's for all.

Raquel

--
Note: To sign off this list, send a "signoff networker" command via
email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=

--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=

<Prev in Thread] Current Thread [Next in Thread>