Just Check the Auto Eject option in the Jukebox properties  - Disable it.

Regards,
Anuj

----- Original Message -----
From: "Bob Payne" <bob_payne AT FWUK.FWC DOT COM>
To: <NETWORKER AT LISTMAIL.TEMPLE DOT EDU>
Sent: Wednesday, June 02, 2004 1:08 PM
Subject: [Networker] Unload retry for jukebox and timing issues on L700e


> Hi all,
> Solaris 8, Networker 7.1.1 and StorageTek L700e with 6 x HP LTO Ultrium-1
> We're occasionally getting "unload retry for jukebox STKL700e: sleeping 30
> secs". Eventually it times-out.
> Networker unmounts the drive but when I check it, the tape has not been
> ejected or apparently rewound (it can take a minute and a half to eject
the
> tape after pressing the unload button on the drive.)
>
> We upgraded to 7.1.1 just over a month ago and this problem has been with
> us for a about 2 weeks. We've also had a L700e robotics firmware upgrade
> along the way.
>
> This could be a timing thing but there are loads of places to affect
> this....jukebox attributes, device attributes and Networker variables.
> Where to start?
>
> On advice, we've changed the eject sleep timer for the jukebox from 5 to
20
> secs but it hasn't fixed it.
>
> Anyone else seen this and can give any advice.
> TIA
>
> Bob
>
> --
> Note: To sign off this list, send a "signoff networker" command via email
> to listserv AT listmail.temple DOT edu or visit the list's Web site at
> http://listmail.temple.edu/archives/networker.html where you can
> also view and post messages to the list.
> =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
>
>

--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=