Yo.
I'm trying to setup our StorageTek L20 Library/Quantum DLT8000 drive on a Linux
box for a migration off of Solaris. I've got Networker 6.1.1 installed (same
version as the Solaris server).
It's getting recognized by the system, just not jbconfig. Here's the contents
of dmesg regarding the SCSI stuff:
----------
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
<Adaptec 2944 Ultra SCSI adapter>
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
Vendor: STK Model: L20 Rev: 0214
Type: Medium Changer ANSI SCSI revision: 03
(scsi0:A:1): 20.000MB/s transfers (10.000MHz, offset 8, 16bit)
Vendor: QUANTUM Model: DLT8000 Rev: 022B
Type: Sequential-Access ANSI SCSI revision: 02
st: Version 20040318, fixed bufsize 32768, s/g segs 256
Attached scsi tape st0 at scsi0, channel 0, id 1, lun 0
st0: try direct i/o: yes (alignment 512 B), max page reachable by HBA 1048575
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 8
Attached scsi generic sg1 at scsi0, channel 0, id 1, lun 0, type 1
----------
Here's the jbconfig output:
----------
gremlin:/nsr/res# jbconfig
1) Install a SmartMedia Jukebox.
2) Install an Autodetected SCSI Jukebox.
3) Install an Autodetected NDMP SCSI Jukebox.
4) Install an SJI Jukebox.
5) Install an STL Silo.
What kind of Jukebox are you installing? [1] 2
These are the SCSI Jukeboxes currently attached to your system:
1) [email protected]: Standard SCSI Jukebox, Vendor <STK>, Product <L20>
Which one do you want to install? 1
Installing an 'Standard SCSI Jukebox' jukebox.
Name you would like to assign to the jukebox device? L20
A brief description of the jukebox device? [[email protected]: Standard SCSI
Jukebox]
Pathname of the control port for the jukebox device? [[email protected]]
Unable to access device "Standard SCSI Jukebox" on control port "[email protected]".
There appears to be something incorrect about your driver
installation. Please consult your driver documentation
to help you troubleshoot your installation.
----------
Here's the output of mt -f /dev/st0 status:
----------
gremlin:~# mt -f /dev/st0 status
SCSI 2 tape drive:
File number=-1, block number=-1, partition=0.
Tape block size 0 bytes. Density code 0x0 (default).
Soft error count since last status=0
General status bits on (50000):
DR_OPEN IM_REP_EN
----------
And here's the output of mtx -f /dev/sg0 inquiry:
----------
gremlin:~# mtx -f /dev/sg0 inquiry
Product Type: Medium Changer
Vendor ID: 'STK '
Product ID: 'L20 '
Revision: '0214'
Attached Changer: No
----------
Everything seems ok from the OS side of things. Just jbconfig seems to be
having a problem. Also, I'm running kernel 2.6.5. I was thinking maybe I
should go back to 2.4.x(?) and see if that works.
/nsr/logs/daemon.log nor any of the system /var/log/* messages say anything.
I dunno. Anybody?
Thanks all!
-Matt
--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
|
