There is also a tool called "ROBOT" (and its X11 interface Xrobot)
for Tru64, one for OpenVMS and one on Windows allowing you to move 
tape from slots to slots.
http://h18000.www1.hp.com/info/SP6444/SP6444PF.PDF

HTH,

Th 





Kind regards - Bien cordialement - Vriendelijke groeten,

Thierry FAIDHERBE

HP Services - Storage Division
Tru64 Unix and Legato EBS Consultant
                                   
 *********       *********   HEWLETT - PACKARD
 *******    h      *******   1 Rue de l'aeronef/Luchtschipstraat
 ******    h        ******   1140 Bruxelles/Brussel/Brussels
 *****    hhhh  pppp *****   
 *****   h  h  p  p  *****   100/102 Blv de la Woluwe/Woluwedal
 *****  h  h  pppp   *****   1200 Bruxelles/Brussel/Brussels
 ******      p      ******   BELGIUM
 *******    p      *******                              
 *********       *********   Phone :    +32 (0)2  / 729.85.42   
                             Mobile :   +32 (0)498/  94.60.85 
                             Fax :      +32 (0)2  / 729.88.30   
     I  N  V  E  N  T        Email :    thierry.faidherbe AT hp DOT com
                             Internet : http://www.hp.com/ 
________________________________________________________________________

MOBISTAR SA/NV 

SYSTEM Team Charleroi, Mermoz 2 Phone : +32 (0)2  / 745.75.81  
Avenue Jean Mermoz, 32          Fax :   +32 (0)2  / 745.89.56  
6041 GOSSELIES                  Email : tfhaidhe AT mail.mobistar DOT be
BELGIUM                         Web :   http://www.mobistar.be/
________________________________________________________________________

 

-----Original Message-----
From: Legato NetWorker discussion [mailto:NETWORKER AT LISTMAIL.TEMPLE DOT EDU]
On Behalf Of Spindler, Brian
Sent: Monday, April 12, 2004 8:44 PM
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Subject: Re: [Networker] Slots

Thank you all.   Probably just easier to open the jukebox up move it and
then re-inventory.


Thanks,
Brian 
-----Original Message-----
From: Tim Cassidy [mailto:tcassid AT KIMBALL DOT COM] 
Sent: Monday, April 12, 2004 2:13 PM
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Subject: Re: [Networker] Slots

Yes your right you can not use NSRJB to go slot to slot. You have to
transport it to the mailslot(CAP) or a device then to the slot you want.

Yes you can do it with the sjimm command. 
We are HP and we use the MC command (mc -s S10 -d S20). Just like the
sjimm command Networker will not know about the change. You MUST
inventory both slots and then he's happy again. Be careful when using
these commands. 
 

-----Original Message-----
From: Itzik Meirson [mailto:imeirson AT mbi.co DOT il]
Sent: Monday, April 12, 2004 12:24 PM
To: Legato NetWorker discussion; Tim Cassidy
Subject: RE: [Networker] Slots

Wrong information!!!
nsrjb cannot and will not move tapes between slots!!!
nsrjb can move tapes from a slot to a mail slot ant then from the mail
slot to another slot:
nsrjb -w -S OrigSlot -P MailSlot
nsrjb -d -S DestSlot -P MailSlot

Outside the knowledge of Networker (not recommended) movements can be
done using the "sjimm" command.
Itzik

> -----Original Message-----
> From: Legato NetWorker discussion
[mailto:NETWORKER AT LISTMAIL.TEMPLE DOT EDU] On Behalf Of Tim Cassidy
> Sent: Monday, April 12, 2004 17:55
> To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
> Subject: Re: [Networker] Slots
> 
> Nsrjb -w -s S1 -d S2.   I think this will work. -s is source -d is
> destination. -w withdraw.
> 
> -----Original Message-----
> From: Legato NetWorker discussion
[mailto:NETWORKER AT LISTMAIL.TEMPLE DOT EDU]
> On Behalf Of Spindler, Brian
> Sent: Monday, April 12, 2004 9:43 AM
> To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
> Subject: [Networker] Slots
> 
> What is the command to move a tape from one slot to another?
> 
> 
> Thanks,
> Brian
> 
> 
> --
> Note: To sign off this list, send a "signoff networker" command via 
> email to listserv AT listmail.temple DOT edu or visit the list's Web site at 
> http://listmail.temple.edu/archives/networker.html where you can also 
> view and post messages to the list.
> =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
> 
> --
> Note: To sign off this list, send a "signoff networker" command via
email
> to listserv AT listmail.temple DOT edu or visit the list's Web site at 
> http://listmail.temple.edu/archives/networker.html where you can also 
> view and post messages to the list.
> =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=


************************************************************************
**************************
The contents of this email and any attachments are confidential.
It is intended for the named recipient(s) only.
If you have received this email in error please notify the system
manager or  the sender immediately and do not disclose the contents to
any one or make copies.

MBI - System Team
************************************************************************
**************************

--
Note: To sign off this list, send a "signoff networker" command via
email to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can also
view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=

--
Note: To sign off this list, send a "signoff networker" command via
email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=

--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=