Re: [Networker] Assistance needed with Storage Tek L20 on new storage node.
2004-03-18 08:27:39
Thanks to all.. it turns out that the Library was in an unstable state us
Conrad mentioned.
I wasn't the one that installed it and had no idea where it was physically
located.
I rebooted it and all is well.
Thanks again!
-----Original Message-----
From: Mark Bradshaw (BTOpenWorld) [mailto:notthehoople AT BTOPENWORLD DOT COM]
Sent: Wednesday, March 17, 2004 4:18 PM
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Subject: Re: [Networker] Assistance needed with Storage Tek L20 on new
storage node.
Hi Guy,
Sounds like interference from the Windows Removable storage Manager to me.
Have you turned it off as per the installation guide/release supplement
(can't remember which one it is in!).
>From the sound of your description NetWorker is trying to talk to the tape
library but has found that something else has already grabbed the library.
Hope this helps
Mark
> Greetings,
>
> I have a question that I hope you folks can help with.
>
> I have a networker data zone with an AIX server, One AIX storage node and One
> windows stroage node.
> They all share a silo. I am trying to add a new windows storage node with a
> local auto changer.
> The new storage node can talk with the server and the server can see the new
> drive (DLT8000).
>
> The problem is that I cannot configure the auto changer. The inquire command
> sees both the drive and the autochanger.
> When I run the jbconfig command, it gets to the end and says it can't talk to
> the controller port and I must
> have a bad driver. We already reloaded the driver so I am thinking it may be a
> permissions issue. The windows
> machine says the driver and device are fine.
>
> Any ideas?
>
> Thanks in advance.
>
> Guy Novello
> Private HealthCare Systems
> 781-895-3117
>
> --
> Note: To sign off this list, send a "signoff networker" command via email
> to listserv AT listmail.temple DOT edu or visit the list's Web site at
> http://listmail.temple.edu/archives/networker.html where you can
> also view and post messages to the list.
> =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
|
|
|