[Networker] legato tape drive ordering with fiber drives thru a brocade switch?
2004-02-24 13:05:22
I run legato 7.1.1 on win2000
i have a storagetek l180 library with 6 fiber hp lto2 tape drives
the drives are connected thru 2 brocade switches
the switches have NO zones setup and all ports can see all other ports
i am trying to re-cable the fiber drives so that the "inquire" output
matches the "sjisn 2.0.0" output.
I dont know if im missing something, but no matter which ports i put which
drives into on the brocade, i cannot get the real tape0 to become the
virtual tape0 with the above commands. with old scsi drives this was easy,
but with the fiber drives i cant get it to work.
has anyone seen this issue and fixed it?
my work around is to enter the drives into "jbconfig" in the order that
"sjisn 2.0.0" told me to, so now when you look at the library in legato,
the drives are not in order, but i really want them to be in the real
order.
thank you in advance.
here is my inquire and sjisn outputs (note: i have unplugged the 2nd hba
for troubleshooting)
C:\Documents and Settings\Administrator>sjisn 2.0.0
Serial Number data for 2.0.0 (STK L180 ):
Library:
Serial Number: MPC02209470
Drive at element address 500:
SCSI-3 Device Identifiers:
VENN:HUM3G00040
Drive at element address 501:
SCSI-3 Device Identifiers:
VENN:HUM3G00050
Drive at element address 502:
SCSI-3 Device Identifiers:
VENN:HUM3G00246
Drive at element address 503:
SCSI-3 Device Identifiers:
VENN:HUM3G00255
Drive at element address 504:
SCSI-3 Device Identifiers:
VENN:HUM3G00046
Drive at element address 505:
SCSI-3 Device Identifiers:
VENN:HUM3G00349
C:\Documents and Settings\Administrator>
C:\Documents and Settings\Administrator>inquire
[email protected]:TEAC CD-224E 9.9A|CD-ROM
[email protected]:STK L180 0306|Autochanger (Jukebox),
\\.\Changer0
S/N: MPC02209470
[email protected]:COMPAQ SCSI COMMUNICATECISS|Unknown Device Type
[email protected]:COMPAQ LOGICAL VOLUME 2.56|Disk, \\.\PHYSICALDRIVE0
WWNN:600508B1001841385850494356340002
[email protected]:COMPAQ LOGICAL VOLUME 2.56|Disk, \\.\PHYSICALDRIVE1
WWNN:600508B1001841385850494356340003
[email protected]:HP Ultrium 2-SCSI K342|Tape
S/N: HUM3G00050
ATNN:HP Ultrium 2-SCSI
HUM3G000
50
WWNN:50060B00001E6372
[email protected]:HP Ultrium 2-SCSI K342|Tape
S/N: HUM3G00040
ATNN:HP Ultrium 2-SCSI
HUM3G000
40
WWNN:50060B00001E634A
[email protected]:HP Ultrium 2-SCSI K342|Tape, \\.\Tape0
S/N: HUM3G00246
ATNN:HP Ultrium 2-SCSI
HUM3G002
46
WWNN:50060B00001E6682
[email protected]:Emulex Utility Ifc Dev.EMU2|(Unknown Device Type b)
[email protected]:Emulex Utility Ifc Dev.EMU2|(Unknown Device Type b)
C:\Documents and Settings\Administrator>
--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- [Networker] legato tape drive ordering with fiber drives thru a brocade switch?,
Evan Gold <=
|
|
|