In regard to: [Networker] Need to confirm steps to upgrade to 6.1.4, George...:

><<  STEPS FOR UPGRADE >>
>1. Backup all client indexes and server's bootstrap (savegrp -O group)
>2. Record latest bootstrap saveset id and volume label (mminfo -B)

I don't know if you have "Match barcode labels" set, but if you *don't*,
the standard bootstrap report and `mminfo -B' leave out one critical
bit of information: the barcode.  You'll want to use a custom mminfo
report that includes barcode, if you don't "match barcode labels".

>3. On primary server, tar off a copy of /nsr/res just for save keeping.

For complete safety, this should be done after NetWorker is down.  If
it's idle you should be fine, but since you're going to take NetWorker
down anyway, you might as well do this after it's down.

>5. Unmount all loaded/mounted tapes.
>
>QUESTION: Should we remove the jukebox entries and devices? If so, I
>guess we'd do that next before step 6.

I wouldn't, but it doesn't really make much difference.

Overall, looks good.

Tim
--
Tim Mooney                              mooney AT dogbert.cc.ndsu.NoDak DOT edu
Information Technology Services         (701) 231-1076 (Voice)
Room 242-J6, IACC Building              (701) 231-8541 (Fax)
North Dakota State University, Fargo, ND 58105-5164

--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=