Evan,
You do not specify what platform you run on nor the Networker version.
Providing this information will usually enable us to provide you more
accurate answers.
Anyway, first try to run "sjirjc x.y.z" with x.y.z being the scsi
address of your jukebox.
Analyze the output and verify the jukebox is telling you there are mail
slots.
Then run the command "sjirdtag x.y.z" to provide you the jukebox view of
its contents including the mail slots.
Last you should run "nsrjb -dvvvvv -P InletSlotNumber -S
SlotToDepositIn"
Itzik

> -----Original Message-----
> From: Legato NetWorker discussion
[mailto:NETWORKER AT LISTMAIL.TEMPLE DOT EDU] On Behalf Of Evan Gold
> Sent: Thursday, February 19, 2004 21:29
> To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
> Subject: [Networker] command to deposit volumes into jukebox?
> 
> I have a storagetek L180 library.
> I put tapes in the cap and want to deposit them into the library from
the
> command line, i tried "nsrjb -d" and "nsrjb -d -N" but it gives an
error
> both times, there ARE tapes in the cap. any ideas?
> 
> here is what ive done so far:
> 
> C:\Documents and Settings\Administrator>nsrjb -d
> Port(s) are empty, please load the cartridges into the port(s)
> Continue depositing volume(s) from the specified slot range? (yes/no)
no
> Deposited 1 cartridge(s), import ports are empty
> 
> C:\Documents and Settings\Administrator>
> C:\Documents and Settings\Administrator>
> C:\Documents and Settings\Administrator>nsrjb -d -N
> Deposited 0 cartridge(s), import ports are empty
> 
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=

**************************************************************************************************
The contents of this email and any attachments are confidential.
It is intended for the named recipient(s) only.
If you have received this email in error please notify the system manager or  
the 
sender immediately and do not disclose the contents to any one or make copies.

MBI - System Team
**************************************************************************************************

--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=