Networker

[Networker] RE : [Networker] SDLT write errors with Networker 7.1

2004-01-14 16:48:25
Subject: [Networker] RE : [Networker] SDLT write errors with Networker 7.1
From: "Girot, Jean-Pierre" <JGirot AT FR.MTI DOT COM>
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Date: Wed, 14 Jan 2004 22:47:15 +0100
Hello,

I think you need to check The st.conf file and the error message that you send 
appears only on rmt6, I think this drive is bad.

Regards

_____________________________________
Jean-Pierre GIROT
Technical Support Department
LCNA

MTI France
7 Avenue des Pommerots - BP 25 - 
78401 Chatou Cedex
Tel: +33 130095349
Fax: +33 130095333
Email: jgirot AT fr.mti DOT com
______________________________________
 

-----Message d'origine-----
De : robert.maiello AT thomson DOT com [mailto:robert.maiello AT THOMSON DOT 
COM] 
Envoyé : mercredi 14 janvier 2004 17:14
À : NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Objet : [Networker] SDLT write errors with Networker 7.1

We've ugraded our Solaris Networker server from 6.1.2 to 7.1.   All seems
fine except we seem to be getting many more SCSI media write errors now
on our SDLT 220 tapes.   The errors show up in Networker as "bad file number"
errors" :

01/13/04 18:50:34 nsrd: media warning: /dev/rmt/6cbn writing: Bad file number, a
t file 2 record 2569
01/13/04 18:50:34 nsrd: media notice: sdlt tape CE0170 on /dev/rmt/6cbn is full
01/13/04 18:50:34 nsrd: media notice: sdlt tape CE0170 used 328 MB of 110 GB cap
acity
01/13/04 18:56:47 nsrd: media warning: /dev/rmt/6cbn moving: fsr 2564: drive sta
tus is UNRECOVERED READ ERROR
01/13/04 18:56:47 nsrd: media emergency: could not position CE0170 to file 2, re
cord 2565

and as hard write errrors in /var/adm/messages:
Jan 13 18:48:10 matrix1 root: [ID 702911 daemon.notice] NetWorker media: (info)
loading volume CE0170 into /dev/rmt/6cbn
Jan 13 18:50:34 matrix1 scsi: [ID 107833 kern.warning] WARNING: /sbus@a,0/QLGC,i
sp@1,10000/st@1,0 (st71):
Jan 13 18:50:34 matrix1         Error for Command: write                   Error
 Level: Fatal
Jan 13 18:50:34 matrix1 scsi: [ID 107833 kern.notice]   Requested Block: 2568
                   Error Block: 2568
Jan 13 18:50:34 matrix1 scsi: [ID 107833 kern.notice]   Vendor: QUANTUM
                   Serial Number:  .  G
Jan 13 18:50:34 matrix1 scsi: [ID 107833 kern.notice]   Sense Key: Media Error
Jan 13 18:50:34 matrix1 scsi: [ID 107833 kern.notice]   ASC: 0xc (write error),
ASCQ: 0x0, FRU: 0x0
Jan 13 18:50:34 matrix1 root: [ID 702911 daemon.notice] NetWorker media: (warnin
g) /dev/rmt/6cbn writing: Bad file number, at file 2 record 2569


With no drive in common for the errors it would appear this version of
Networker is having problems with our media. Is anyone using SDLT drives
with Networker 7.x successfully without errors like this?   Could this be
related to the new CDI system of networker 7.x or is it suddenly bad media?

Also, this tape was being written during cloning.  This version of Networker
now leaves the nsrclone process hung along with the tape being read.  Sigh.

Robert Maiello
Thomson Healthcare

--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=

--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=

<Prev in Thread] Current Thread [Next in Thread>