Networker

Re: [Networker] Sleep/Unload Timers on COmpaq TL895

2004-01-08 10:16:41
Subject: Re: [Networker] Sleep/Unload Timers on COmpaq TL895
From: Pat OBrien <Pat.OBrien AT CHOICEPOINT DOT COM>
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Date: Thu, 8 Jan 2004 10:16:21 -0500
FYI,
If it because you have done a tru64 upgrade from v4X to 5X, the library is 
autodetected improperly.  I just closed a case open for a year because legato 
finally found the answer.  This library should autodetect as a Digital TL895 or 
6 depending on exact model and actually autodects as standard scsi jukebox 
instead.  This can be fixed with a "helper file" during jbconfig. This creates 
a issue where you then go off playing with all the settings to no avail.  If 
this is not your case, then:
                Eject sleep     =  5
                cleaning delay  = 60
                unload sleep    =  5
                load sleep              =  5
                deposit timeout = 15
                withdraw timeout        = 15
                port polling    =  3
with the following features :
                element_status
                volume_tags
                barcode
                stacker_export

pmob

-----Original Message-----
From: Narkinsky, Brian [mailto:Brian.Narkinsky AT DEP.STATE.FL DOT US]
Sent: Wednesday, January 07, 2004 3:59 PM
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Subject: [Networker] Sleep/Unload Timers on COmpaq TL895


Can anybody share with me their values for Sleep and Unload for a TL895
jukebox with DLT7000 drives?  Mine got reset and I cannot remember what I had
them set to.  I know I had changed them from default but, can't remeber what
worked.
 
Thanks,
 
Brian
 

Brian Narkinsky

System Manager

Department of Environmental Protection

MS 6520

2600 Blairstone RD

Tallahassee, FL 32399

phone (850)245-8314

fax (850)412-0400

 

 

--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=

--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=

<Prev in Thread] Current Thread [Next in Thread>