Hello all
We are having an unpredictable problem with manual cloning. We are cloning from
tape-to-tape
and disk-to-tape, both having similar problems.
When the first clone tape is marked full the cloning session does NOT request
another clone tape even though
there are tapes available.
The errors in the daemon.log file are
example 1 :-
12/16/03 10:09:43 nsrd: cloning session:1 of 326 save set(s) reading from
msbkp1.NetwareSurfers.001 2000 MB of 602 GB
12/16/03 10:13:56 nsrd: surfers1: browsing
12/16/03 14:02:57 nsrmmd #1: unable to complete CDI get TapeAlert call
12/16/03 14:02:57 nsrmmd #1: check_tapealert: check_cdi_infop and cdi_open
failed, 8 8 the device file name specified is unusable by CDI for device
\\.\Tape2
12/16/03 14:02:57 nsrd: media warning: \\.\Tape2 writing: unknown error 1167
(0x48f), at file 84 record 13410
12/16/03 14:02:57 nsrd: media notice: sdlt320 tape DKG193 on \\.\Tape2 is full
12/16/03 14:02:57 nsrd: media notice: sdlt320 tape DKG193 used 173 GB of 160 GB
capacity
12/16/03 14:02:57 nsrd: media warning: verification of volume "DKG193", volid
1474181057 failed, read open error: drive status is Drive reports no error -
but state is unknown
12/16/03 14:02:57 nsrd: media notice: verification of volume "DKG193", volid
1474181057 failed, volume is being marked as full.
12/16/03 14:02:58 nsrd: msbkp1.gccc.goldcoast.qld.gov.au:cloning session done
saving to pool 'Clone' (DKG193)
12/16/03 14:02:58 nsrd: media notice: Cloning of save sets to volume DKG193 on
\\.\Tape2 is being terminated because: Media verification failed
12/16/03 14:02:58 nsrd: write completion notice: Writing to volume DKG193
complete
12/16/03 14:02:58 nsrd: cloning session:save sets done reading 175 GB
12/16/03 14:02:58 ansrd: failed to execute MODE_CLONE
example 2:-
01/06/04 14:02:57 nsrmmd #1: unable to complete CDI get TapeAlert call
01/06/04 14:02:57 nsrmmd #1: check_tapealert: check_cdi_infop and cdi_open
failed, 8 8 the device file name specified is unusable by CDI for device
\\.\Tape2
01/06/04 14:02:57 nsrd: media warning: \\.\Tape2 writing: unknown error 1167
(0x48f), at file 4 record 12753
01/06/04 14:02:57 nsrd: media notice: sdlt320 tape GC8606 on \\.\Tape2 is full
01/06/04 14:02:57 nsrd: media notice: sdlt320 tape GC8606 used 5826 MB of 160
GB capacity
01/06/04 14:02:57 nsrd: media warning: verification of volume "GC8606", volid
4277787728 failed, read open error: drive status is Drive reports no error -
but state is unknown
01/06/04 14:02:57 nsrd: media notice: verification of volume "GC8606", volid
4277787728 failed, volume is being marked as full.
01/06/04 14:02:57 nsrd: msbkp1.gccc.goldcoast.qld.gov.au:cloning session done
saving to pool 'Clone' (GC8606)
01/06/04 14:02:57 nsrd: media notice: Cloning of save sets to volume GC8606 on
\\.\Tape2 is being terminated because: Media verification failed
01/06/04 14:02:57 nsrd: write completion notice: Writing to volume GC8606
complete
01/06/04 14:02:58 nsrd: cloning session:save sets done reading 180 GB
01/06/04 14:02:58 ansrd: failed to execute MODE_CLONE
This error appears to happen with data from all clients but is more frequent
with Netware data.
If anyone has any ideas on this we would be very grateful :))
If required this is our Networker server config
Microsoft Windows 2000 Server
Legato v 7.1
Netware/Microsoft/Unix clients
ESL9322 Library with 4x 160/320 SDLT drives
Thanks
Regards
Deb & Ruth
*********************************************************************************
This e-mail and its contents is confidential to Gold Coast City Council
and un-authorised use is strictly prohibited.
*********************************************************************************
--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
|