You can also get same "connection failures"
if the backup server cannot reverse-lookup the ip of the
client you are launching nwadmin/winworkr from.

Check in your server's daemon.log for 
12/13/03 14:12:52 nsrd: Access violation - unknown host: u.x.y.z  

If so, please fill your server's hosts file correctly or correct dns

hth,

Th



Kind regards - Bien cordialement - Vriendelijke groeten,

Thierry FAIDHERBE

HPCI - Storage & Server Integration Practice 
Tru64 Unix and Legato EBS Consultant
                                   
 *********       *********   HEWLETT - PACKARD
 *******    h      *******   1 Rue de l'aeronef/Luchtschipstraat
 ******    h        ******   1140 Bruxelles/Brussel/Brussels
 *****    hhhh  pppp *****   
 *****   h  h  p  p  *****   100/102 Blv de la Woluwe/Woluwedal
 *****  h  h  pppp   *****   1200 Bruxelles/Brussel/Brussels
 ******      p      ******   BELGIUM
 *******    p      *******                              
 *********       *********   Phone :    +32 (0)2  / 729.85.42   
                             Mobile :   +32 (0)498/  94.60.85 
                             Fax :      +32 (0)2  / 729.88.30   
     I  N  V  E  N  T        Email :    thierry.faidherbe AT hp DOT com
                             Internet : http://www.hp.com/ 
________________________________________________________________________

MOBISTAR SA/NV 

SYSTEM Team Charleroi, Mermoz 2 Phone : +32 (0)2  / 745.75.81  
Avenue Jean Mermoz, 32          Fax :   +32 (0)2  / 745.89.56  
6041 GOSSELIES                  Email : tfhaidhe AT mail.mobistar DOT be
BELGIUM                         Web :   http://www.mobistar.be/
________________________________________________________________________

 

-----Original Message-----
From: Legato NetWorker discussion [mailto:NETWORKER AT LISTMAIL.TEMPLE DOT EDU] 
On Behalf Of Andrew McGeorge
Sent: lundi 15 décembre 2003 21:29
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Subject: Re: [Networker] NetWorker User

Hi,

Try it without the space:

Winworkr -sbackupserver

Regards

Andrew McGeorge
Senior Systems Specialist
Group Technology Operations


-----Original Message-----
From: Hooton, Gerard [mailto:G.Hooton AT UCC DOT IE]
Sent: 16 December 2003 12:16AM
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Subject: [Networker] NetWorker User


Hello All,
How do I tell NetWorker User what server to connect to?
I have NetWorker User 7.1 running on an XP box.
Using NetWorker Administrator I can see the server that I wish to use, but
NetWorker User is automatically Connecting to a different server. It
connects to the first server that appears on the server list produced by
NetWorker Administrator. When I installed NetWorker 7.1 I specified the
server as part of the setup. Any help is very welcome.

Connecting to another server
Gerard Hooton.
Department Of Microelectronic Engineering,
University College,
Cork.
Ireland.
Tel: +353-21-4904576
Fax: +353-21-4904573
www.ue.ucc.ie

--
Note: To sign off this list, send a "signoff networker" command via email to
listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can also view
and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=

========================================================================================
This email message and attachments are confidential to our organisation and 
subject to legal privilege.  If you have received this email in error, please 
advise the sender immediately and destroy the message and any attachments. If 
you are not the intended recipient you are notified that any use, distribution, 
amendment, copying or any action taken or omitted to be taken in reliance of 
this message or attachments is prohibited.  You can read our Privacy Policy 
here: <http://www.asbbank.co.nz/privacystatement.stm>
=========================================================================================

--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=

--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=