Robert:
So when you mention braking up All into individual directories, are you
referring to listing the individual volumes out instead of the ALL?
Thanks,
Steve
>>> Robert Maiello <robert.maiello AT MEDEC DOT COM> 10/20/03 12:34PM >>>
Yes, a saveset of All on a Netware client will yield 1 savestream for
each
volume; SYS:, USERS: etc..
Since we had one big USERS volume we broke this up into its top level
dirs
as savesets to get better parallelism.
That said, even with that, we were only able to achive 5MB-8MB/sec;
with
a Gigabit card (apparently an older one as was pointed out in this
thread).
Perhaps newer Netware servers and releases get better performance?
Robert Maiello
Thomson Healthcare
On Fri, 17 Oct 2003 12:24:58 -0600, Librado Pamintuan
<LPAMINTU AT REGINA DOT CA>
wrote:
>Hello All,
>Is it on the design of Legato Networker that a backup of Netware
server
>using 'All' produces only 1 stream and very slow (800 KB/s to 1
MB/s)?
>We have tried everything from NIC card settings to NetWare NLMs and
the
>latest NetWare client pack from Legato and still we cannot get a
decent
>throughput.
>Finally, we tried the hard way, split the client's savesets, instead
of
>'All', we specified each directory under Vol1 which creates a total
of
>31 savesets.
>With a client parallelism of 10, this gave us a throughput of 3 - 4
>MB/s, on 2 DLT 7000 tape drives, but when we bump the parallelism to
15
>so that we can use another tape drive, we have lots of 'connection
time
>out' and 'connection refused' errors.
>Using this method requires diligence, because there might be a new
>directory and forgot to advise the NW admin about it and won't be
>included in the backups.
>
>Any other possible solution/idea is greatly appreciated.
>
>Environment: NW for AIX v6.1.3 (AIX O/S 4.3.3)
>Client: NetWare v4.21 (NetWare v6)
>
>thanks,
>
>
>Librado Pamintuan
>Technical Support Analyst II
>Information Systems Dep.
>Operations Group
>City of Regina
>
>Phone: (306) 777-7573
>General Fax: (306) 777-6804
>eFax: (306) 546-6002
>eMail: lpamintu AT regina DOT ca
>
>--
>Note: To sign off this list, send a "signoff networker" command via
email
>to listserv AT listmail.temple DOT edu or visit the list's Web site at
>http://listmail.temple.edu/archives/networker.html where you can
>also view and post messages to the list.
>=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
--
Note: To sign off this list, send a "signoff networker" command via
email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
|
