From:    Tammie Robertson <trobertson AT ALLIEDMACHINE DOT COM>
Subject: Re: jukebox reset confuses Legato

Sometimes recycling the power works for but others times I have to delete
the devices and run jbconfig again.

>

-----Original Message-----
From: Mei Qing [mailto:mqing AT CSEE.WVU DOT EDU]

I had the same problem before. What I did is to kill the procedure at
command line. Then reset the jukebox. It should be OKay. If you still got
problem, try recyle the power.

I just experienced a problem that is somewhat common.  My overnight
backups hung up for some reason on cloning--the GUI monitor showed that
clones were occurring, but the jukebox was idle.  My backup groups did

Fixing it isn't really the problem.  Had I stopped the group before I
did the reset, I might not have had the confusion.  In any case, I
stopped the server process, cleaned out the /nsr/tmp files, and
restarted the server and all was well.  This might not be an option for
 servers in constant use.  I'm more interested in knowing why it is
that doing a jukebox reset from the Autochanger operations menu doesn't
properly communicate the changed state of the jukebox to the main GUI /
monitor.
--
Martin J. Dellwo
(610) 458-5264 x6512
mdellwo AT prdus.jnj DOT com / dellwo AT 3dp DOT com
Systems Administrator, 3DP / PRDUS

--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=