Hi,
My licenses are installed on the networker server itself. There is no
license server.
Thanks for your response.
regards,
==========================
Sagar Srivastava
Accenture - Bangalore Delivery Center
Fax: +91 80 5129 5001
Phone: +91 80 5129 5045 (Interim)
E-Mail: sagar.srivastava AT accenture DOT com
MSN ID: sagar_sri AT hotmail DOT com
Yahoo ID: sagar_srivastava
"Maarten Boot
(CWEU-USERS/CWNL)" To: Legato NetWorker
discussion <NETWORKER AT LISTMAIL.TEMPLE DOT EDU>, Sagar
<[email protected]
Srivastava/Internal/Accenture@Accenture
om> cc:
Subject: Re: [Networker] My
legato licenses installed and authorized but n ot working.-
10/16/2003 07:51 PM Help
Are your licenses on a license server or on the networker server itself
if they are on a separate license server then maybe the time difference is
to
big between the 2. (Im guessing here 2, I do not use the license server
myself)
Maarten
On Thursday 16 October 2003 15:42, you wrote:
> Thanks Raj for a quick help.
>
> Till yesterday all the clients were working. I have confirmed from change
> request forms. There have been no changes made these VLANs/networks.
> Network access is perfectly through.
>
> The interesting thing is that the GUI on the networker server is showing
> all the licenses but the command nsrlic -i is showing Available as 10 and
> used as 10:
>
>
> I am puzzled and it is urgent for my site!
>
> ==================================================================
>
> C:\scripts>nsrlic -i
> connecting to bdcbakup1w.bdc.co.in ...
> nsrlic: License Summary:
> nsrlic: Available: sv=10, ws=0, clu=0, clu_nt=2, clu_unix=0, clu_linux=0
> nsrlic: Borrowed: sv_borrowed=0, clu_borrowed_nt=0,
clu_borrowed_unix=0,
> clu_b
> orrowed_linux=0
> nsrlic: Remaining: sv=0, ws=0, clu=0, clu_nt=2, clu_unix=0, clu_linux=0
> nsrlic: Connected Servers: (10)
> nsrlic: bdcaspen1w bdcbakup1w.bdc.co.in bdcdc1w bdcfs1w bdchpovop1w
> bdchpovr1w
> bdcprojdc1w bdcprojfs1w bdcsiebel2w bngln1001.accenture.com
> Available commands are:
> summary - display a summary report of licenses
> detail - display a detailed report of licenses
> connect [server name] - connect to server
> help - list command helps.
> quit - quit out of nsrlic command.
> nsrlic> detail
>
> SERVER (UNIVERSAL) CLIENT LICENSES
> Available: 10
> Used: 10
> Borrowed from Server: 0
> Remaining: 0
> Connected Clients: bdcaspen1w,
> bdcbakup1w.bdc.co.in, bdcdc1w,
> bdcfs1w, bdchpovop1w,
> bdchpovr1w, bdcprojdc1w,
> bdcprojfs1w, bdcsiebel2w,
> bngln1001;
>
> WORKSTATION CLIENT LICENSES
> Available: 0
> Used: 0
> Remaining: 0
> Connected Clients: ;
>
> CLUSTER CLIENT LICENSES
> Available: 0
> Used: 0
> Borrowed from Cluster for NT: 0
> Borrowed from Cluster for UNIX: 0
> Borrowed from Cluster for LINUX: 0
> Remaining: 0
> Connected Clients: ;
>
> NT CLUSTER CLIENT LICENSES
> Available: 2
> Used: 0
> Remaining: 2
> Connected Clients: ;
>
> UNIX CLUSTER CLIENT LICENSES
> Available: 0
> Used: 0
> Remaining: 0
> Connected Clients: ;
>
> LINUX CLUSTER CLIENT LICENSES
> Available: 0
> Used: 0
> Remaining: 0
> Connected Clients: ;
>
> SERVER/CLUSTER CLIENT TYPES
> AIX: 0
> Digital UNIX: 0
> HP UX: 0
> HP MPE: 0
> Linux: 0
> NetWare: 0
> Network Appliance: 0
> Sequent: 0
> SGI: 0
> Solaris: 0
> SunOS: 0
> UnixWare: 0
> Windows NT Server: 10
>
> WORKSTATION CLIENT TYPES
> DOS: 0
> Macintosh: 0
> OS/2: 0
> Windows 3.1x: 0
> Windows 95: 0
> Windows NT Workstation: 0
> UX/4800: 0
> Others: 0
>
> Defined Clients: bdcbpofs1w, bdchpnnm1w, bdctms,
> epabxpc;
> PRE-5.0 CLIENT TYPES: ;
>
> CLIENT PAKS: unix clientpak, nt clientpak;
>
> CLIENT TYPES ALLOWED: AIX client,
> Digital Unix client, HP client,
> Linux/NetBSD/FreeBSD/BSDI client,
> SCO client,
> Sequent Unix client,
> Silicon Graphic client,
> Solaris client, Sun client,
> Unixware client,
> Windows 3.1x client,
> Windows 95 client,
> Windows NT Server client,
> Windows NT Workstation client;
> nsrlic>
>
===========================================================================
>============================
>
> regards,
> ==========================
> Sagar Srivastava
> Accenture - Bangalore Delivery Center
> Fax: +91 80 5129 5001
> Phone: +91 80 5129 5045 (Interim)
> E-Mail: sagar.srivastava AT accenture DOT com
> MSN ID: sagar_sri AT hotmail DOT com
> Yahoo ID: sagar_srivastava
>
>
>
>
> Raj Sobratee
> <raj.sobratee AT harrierzeuros DOT co. To: Sagar
> Srivastava/Internal/Accenture@Accenture uk>
> cc:
> Subject: RE:
> [Networker] My legato licenses installed and authorized but n ot
10/16/2003
> 06:54 PM working.- Help
>
>
>
>
> Hi Sagar
>
> AFAIK the messages you cut n pasted don't show it failing because of your
> licensing. If you believe they are licensing related then add a temp
> enabler from the latest media kit for 100 client connections and rerun
the
> backup to see if that resolves the issue ?
>
> Instead I think they're failing because :
>
> save: Cannot open save session with 10.180.195.50
>
> have you ever been able to backup the client "bdcbpofs1w" ?
>
> If so then check your change request forms to see what has changed in any
> configuration on the network.
>
> And if not, then check that you can ping from server=>client and vice
versa
> for the short and the FQDN's of both. And make sure that the names and
the
> IP addresses match up accordingly.
>
> And check that you've added the long name and the short name to the
> client's
> & server's hosts file
>
> regards
>
> Raj
>
> -----Original Message-----
> From: Sagar Srivastava [mailto:sagar.srivastava AT ACCENTURE DOT COM]
> Sent: 16 October 2003 10:31
> To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
> Subject: [Networker] My legato licenses installed and authorized but not
> working.- Help
>
>
> Hi,
> I had a licensing issue on my Legato networker 6.1.2 build 640. Yesterday
I
> installed licenses for:
>
> a)networker server power edition windows(10 client licenses)
> b) autochanger module
> c) 5 client packs for windows- 3 nos
> d) some other licenses.
>
> all the licenses are installed and authorized for my host id I am sure.
>
> Totally I have around 12 clients configured, but I have installed
licenses
> for totally 25 clients.still my last 2 clients fail as shown in the log.
>
>
> Can anyone help?
>
>
>
===========================================================================
>=
>
> =========================
> Oct 16 14:09:05 bdcbakup1w.bdc.co.in: --- Unsuccessful Save Sets ---
> Oct 16 14:09:05 bdcbakup1w.bdc.co.in: * bdcbpofs1w:C:\ 5 retries
attempted
> Oct 16 14:09:05 bdcbakup1w.bdc.co.in: * bdcbpofs1w:C:\ save: RAP error:
> Unable to grant SERVER (UNIVERSAL) CLIENT license: Too many clients.
> Maximum is 10
> Oct 16 14:09:05 bdcbakup1w.bdc.co.in: * bdcbpofs1w:C:\
> Oct 16 14:09:05 bdcbakup1w.bdc.co.in: * bdcbpofs1w:C:\ save: Cannot open
> save session with 10.180.195.50
> Oct 16 14:09:05 bdcbakup1w.bdc.co.in: * bdcbpofs1w:D:\ 5 retries
attempted
> Oct 16 14:9:05 bdcbakup1w.bdc.co.in: * bdcbpofs1w:D:\ save: RAP error:
> Unable to grant SERVER (UNIVERSAL) CLIENT license: Too many clients.
> Maximum is 10
> Oct 16 14:09:05 bdcbakup1w.bdc.co.in: * bdcbpofs1w:D:\
> Oct 16 14:09:05 bdcbakup1w.bdc.co.in: * bdcbpofs1w:D:\ save: Cannot open
> save session with 10.180.195.50
> Oct 16 14:09:05 bdcbakup1w.bdc.co.in: * bdcbpofs1w:E:\ 5 retries
attempted
> Oct 16 14:09:05 bdcbakup1w.bdc.co.in: * bdcbpofs1w:E:\ save: RAP error:
> Unable to grant SERVER (UNIVERSAL) CLIENT license: Too many clients.
> Maximum is 10
> Oct 16 14:09:05 bdcbakup1w.bdc.co.in: * bdcbpofs1w:E:\
> Oct 16 14:09:05 bdcbakup1w.bdc.co.in: * bdcbpofs1w:E:\ save: Cannot open
> save session with 10.180.195.50
> Oct 16 14:09:05 bdcbakup1w.bdc.co.in: * bdcbpofs1w:F:\ 5 retries
attempted
> Oct 16 14:09:05 bdcbakup1w.bdc.co.in: * bdcbpofs1w:F:\ save: RAP error:
> Unable to grant SERVER (UNIVERSAL) CLIENT license: Too many clients.
> Maximum is 10
> Oct 16 14:09:05 bdcbakup1w.bdc.co.in: * bdcbpofs1w:F:\
> Oct 16 14:09:05 bdcbakup1w.bdc.co.in: * bdcbpofs1w:F:\ save: Cannot open
> save session with 10.180.195.50
> Oct 16 14:09:05 bdcbakup1w.bdc.co.in: * bdcbpofs1w:SYSTEM STATE:\ 5
retries
> attempted
>
>
===========================================================================
>=
This message is for the designated recipient only and may contain
privileged, proprietary, or otherwise private information. If you have
received it in error, please notify the sender immediately and delete the
original. Any other use of the email by you is prohibited.
--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
|
