Networker

Re: [Networker] Prematurely marking SDLT tapes full

2003-08-06 10:35:15
Subject: Re: [Networker] Prematurely marking SDLT tapes full
From: "Myles, Laura M" <laura.myles AT PNL DOT GOV>
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Date: Wed, 6 Aug 2003 07:35:10 -0700
having the same problem now 
using adic 1000 scalar - networker 7 - lto drives.  tapes are going full with 
only 100MB .. only on storage node drives though.  If I run a backup using the 
logical drives .. i get 132GB-170GB per tape.  I'm pretty frustrated at this 
point .. and it seems like many others with different hardware and software are 
having the same problem.  

Laura Myles
W:375-2784/C:521-2950
laura.myles AT pnl DOT gov






-----Original Message-----
From: Matt Musgrove [mailto:matt.musgrove AT THALES-IS DOT COM]
Sent: Wednesday, August 06, 2003 6:39 AM
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Subject: [Networker] Prematurely marking SDLT tapes full


Hello,

Since I have moved to SDLT320 many of my tapes get prematurely
marked as full.  Sometimes less than 1 GB is written.

Environment:
Networker 6.1.3,  Solaris 8, backs up Network Appliance F820,
Qualstar TLS-6430 library, 3 * SDLT320

I get no messages in /var/adm/messages, no indication of SCSI
timeouts or write errors.  Solaris Patch 108725-12 st driver patch
is installed.  I have not established yet whether this occurs on all
my drives or just one.  Has anyone else had this problem?

regards

Matt

--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=

--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=

<Prev in Thread] Current Thread [Next in Thread>