Networker

Re: [Networker] backing up a windows 2003 server with active dire ctory

2003-07-28 04:34:52
Subject: Re: [Networker] backing up a windows 2003 server with active dire ctory
From: Vikash Tulsi <Vikash AT KENTRON.CO DOT ZA>
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Date: Mon, 28 Jul 2003 10:26:45 +0200
Yes ! That is correct. From the release notes.

The release notes for NW 7.0 include the following :-


NetWorker Release 7.0 Clients Backing up to a NetWorker Datazone
Earlier Than Release 7.0 (LGTpa52303)
If installing a NetWorker client release 7.0 into NetWorker datazone earlier
than release
7.0 (for example, NetWorker release 6.1.3 Server backing up 7.0 Client), you
will
require a fix for the pre-7.0 NetWorker Server. Please contact Legato
Technical Support
for this fix.
A release 7.0 client will be able to backup and recover to a pre-7.0 server
without this
fix, but backup failures of the 7.0 client will be reported as successful.

I am experiencing a problem, but I believe it may be specific to my site.

Regards
Vikash

-----Original Message-----
From: Ciolek, Ken [mailto:Ken.Ciolek AT AIG DOT COM]
Sent: 24 July 2003 05:36
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Subject: Re: [Networker] backing up a windows 2003 server with active
dire ctory


So you can use 6.1.3 on the server and backup a WIN2K3 server. Is that
correct?

Ken Ciolek
SAN Storage Administrator
Open Systems Support - Storage

(973)533-2094
(973)277-1148 (Cell)
(888)463-9721 (Pager)
Ken.Ciolek AT aig DOT com

-----Original Message-----
From: Vikash Tulsi [mailto:Vikash AT KENTRON.CO DOT ZA]
Sent: Thursday, July 24, 2003 9:40 AM
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Subject: Re: [Networker] backing up a windows 2003 server with active dire
ctory

Hi ! All

Unix Networker Server : 6.1.3
W2k3 client Networker : 7

I have upgraded my server to 6.1.3 but experiencing the following problem
with backing up the w2k3 server that has a networker 7 client.

Take for example a file that has been modified, that's night incremental
backup will backup that file, but subsequent incremental backups results in
that file (which has not been modified) still being backed up.

The file can be modified in two ways either directly by editing the file or
changing the file permissions.

If we now expand the problem to a large file server environment the amount
of data that needs to be backed up on a nightly basis is large, it is almost
equivalent to doing a full backup daily on the file system.

Is it the archive Bit ?

On further analysis, the archive bit is not being reset on subsequent
incremental backups. If one manually deselects the archive bit the file
would not be incrementally backed up.

Looking for any assistance

Thanking you in advance
Vikash




-----Original Message-----
From: James Howard [mailto:jhoward AT RACKSPACE DOT COM]
Sent: 14 July 2003 02:59
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Subject: Re: [Networker] backing up a windows 2003 server with active
dire ctory


The 7.0 client wil work fine with 6.1.3 server.  We are doing it right
now with about 40 W2K3 servers.

James

> -----Original Message-----
> From: Legato NetWorker discussion
> [mailto:NETWORKER AT LISTMAIL.TEMPLE DOT EDU] On Behalf Of Vikash Tulsi
> Sent: Monday, July 14, 2003 9:17 AM
> To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
> Subject: Re: [Networker] backing up a windows 2003 server
> with active dire ctory
>
>
> Hi ! Davina
>
> I believe you are correct on I reviewing the compatibility
> guide I notice that only clientpak version 7.0 supports windows 2003.
>
> I would then deduce that an upgrade of the Networker server
> to version 7 would introduce the  version 7 client pack.
>
> Thanks for the reply
> Vikash
>
>
> -----Original Message-----
> From: Davina Treiber [mailto:Treiber AT hotpop DOT com]
> Sent: 14 July 2003 01:22
> To: Legato NetWorker discussion; Vikash Tulsi
> Subject: Re: [Networker] backing up a windows 2003 server
> with active directory
>
>
> Vikash Tulsi wrote:
> > Hi ! All
> >
> > I am curious to know if any one is successfully backing up
> a windows
> > 2003 server with active directory ?
> >
> > My backup server : Solaris ver 2.6, networker version : 6.1.2
> >
>
> Windows 2003 support comes with NW7.0. To backup a 7.0
> client, you ought to also have a 7.x server. It may or may
> not work with a 6.1.2 server, but Legato probably wouldn't support it.
>
>
>
> **************************************************************
> *****************************************
> Disclaimer:  The information contained in this communication
> is confidential and may be legally privileged. It is intended
> solely for the use of the individual or entity to whom it is
> addressed and others authorised to receive it. Any review,
> retransmission, dissemination, copying, disclosure or other
> use of, or taking of any action in reliance upon, this
> information by person or entities other then the intended
> recipient is prohibited. If you have received this message in
> error, please notify the sender immediately by e-mail,
> facsimile or telephone and return and/or destroy the original
> message and all copies from any computer.
>
> Kentron, a division of Denel (Pty) Ltd, exercises no
> editorial control over e-mail messages originating in the
> organisation and does not accept any responsibility for
> either the contents of the message or any copyright laws that
> may have been violated by the person sending this message.
> Kentron is neither liable for the proper and complete
> transmission of the information contained in this
> communication nor any delay in its receipt. This message
> should not be copied or used for any purpose other than
> intended, nor should it be disclosed to any other person.
> **************************************************************
> *****************************************
>
> --
> Note: To sign off this list, send a "signoff networker"
> command via email to listserv AT listmail.temple DOT edu or visit
> the list's Web site at
> http://listmail.temple.edu/archives/networker.> html where you
> can also view and post messages to the list.
> =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
>

--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=


****************************************************************************
***************************
Disclaimer:  The information contained in this communication is confidential
and may be legally privileged.
It is intended solely for the use of the individual or entity to whom it is
addressed and others authorised to receive it.
Any review, retransmission, dissemination, copying, disclosure or other use
of, or taking of any action in reliance upon, this information by person or
entities other then the intended recipient is prohibited.
If you have received this message in error, please notify the sender
immediately by e-mail, facsimile or telephone and return and/or destroy the
original message and all copies from any computer.

Kentron, a division of Denel (Pty) Ltd, exercises no editorial control over
e-mail messages originating in the organisation and does not accept any
responsibility for either the contents of the message or any copyright laws
that may have been violated by the person sending this message.
Kentron is neither liable for the proper and complete transmission of the
information contained in this communication nor any delay in its receipt.
This message should not be copied or used for any purpose other than
intended, nor should it be disclosed to any other person.
****************************************************************************
***************************

--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=

--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=


*******************************************************************************************************
Disclaimer:  The information contained in this communication is confidential 
and may be legally privileged.
It is intended solely for the use of the individual or entity to whom it is 
addressed and others authorised to receive it.
Any review, retransmission, dissemination, copying, disclosure or other use of, 
or taking of any action in reliance upon, this information by person or 
entities other then the intended recipient is prohibited.
If you have received this message in error, please notify the sender 
immediately by e-mail, facsimile or telephone and return and/or destroy the 
original message and all copies from any computer.

Kentron, a division of Denel (Pty) Ltd, exercises no editorial control over 
e-mail messages originating in the organisation and does not accept any 
responsibility for either the contents of the message or any copyright laws 
that may have been violated by the person sending this message.
Kentron is neither liable for the proper and complete transmission of the 
information contained in this communication nor any delay in its receipt.
This message should not be copied or used for any purpose other than intended, 
nor should it be disclosed to any other person.
*******************************************************************************************************

--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=