Networker

Re: [Networker] Jbconfig "no SCSI jukeboxes connected"

2003-07-16 14:17:53
Subject: Re: [Networker] Jbconfig "no SCSI jukeboxes connected"
From: "Myles, Laura M" <laura.myles AT PNL DOT GOV>
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Date: Wed, 16 Jul 2003 11:17:43 -0700
i think you just need to do the "jbconfig -l (lower case L)"  instead of just 
jbconfig 
Laura Myles
W:375-2784/C:521-2950
laura.myles AT pnl DOT gov






-----Original Message-----
From: Michael Brooks [mailto:MichaelB AT SEQUOIAINS DOT COM]
Sent: Wednesday, July 16, 2003 11:15 AM
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Subject: Re: [Networker] Jbconfig "no SCSI jukeboxes connected"


it appears you have the removable storage service enabled. if you do not
need this, disable it.

michael brooks ................ michaelb AT sequoiains DOT com
Network Administrator ......... 831.657.4539 phone
Sequoia Insurance Company ..... 831.657.4512 fax


> -----Original Message-----
> From: Bruno Madeira [mailto:bmadeira AT TOTALSTOR DOT COM]
> Sent: Wednesday, July 16, 2003 10:04 AM
> To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
> Subject: [Networker] Jbconfig "no SCSI jukeboxes connected"
>
> Hi ppl,
>
> NW 7.0
> Windows 2000 Server
> ADIC Scalar 100 SNC 5101
>
> I have installed a Scalar 100 w/ a SNC to connect the robot
> over fiber.
> After i install the drivers, i run the inquire and all seems ok.
>
> ********************************************************************
> C:\>inquire -l
> -l flag found: searching all LUNs, which may take over 10
> minutes per adapter
>         for some fibre channel adapters.  Please be patient.
> Could not start a Removable Storage session (0x00000422).
> [email protected]:Maxtor 32049H2          YAH8|Disk, \\.\PHYSICALDRIVE0
> [email protected]:BCD 40XH CD-ROM         U1.6|CD-ROM
> [email protected]:Emulex  Utility Ifc Dev.EMU2|(Unknown Device Type b)
> [email protected]:ADIC    Scalar SNC      41e3|(Unknown Device Type c)
>                                            S/N: 611990
>                                            VENN:ADIC    Scalar SNC
> 611990
>                                            IENN:1000006045174192
>                                            IEPN:2001006045174192
>                                            WWNN:1000006045174192
>                                            WWPN:2001006045174192
>                                            PORT:00000001
> [email protected]:ADIC    Scalar 100      2.86|Autochanger (Jukebox)
>                                            S/N: ADIC9K0013121
>                                            VENN:ADIC    Scalar 100
> CIDA00K9
> 2131   1
>                                            IENN:20A0006045174192
>                                            IEPN:2001006045174192
>                                            WWNN:20A0006045174192
>                                            WWPN:2001006045174192
>                                            PORT:00000001
> [email protected]:IBM     ULTRIUM-TD1     25D4|Tape, \\.\Tape0
>                                            S/N: 6811304958
>                                            ATNN:IBM     ULTRIUM-TD1
> 68113049
> 58
> [email protected]:IBM     ULTRIUM-TD1     25D4|Tape, \\.\Tape1
>                                            S/N: 6811300353
>                                            ATNN:IBM     ULTRIUM-TD1
> 68113003
> 53
> [email protected]:Emulex  Utility Ifc Dev.EMU2|(Unknown Device Type b)
> **************************************************************
> **********
> ***********
>
> When i run the jbconfig command, it tells me that there is no
> jukebox connected.
>
> ***************************************************************
> C:\Documents and Settings\administrator.TOTALSTOR>jbconfig
>          1) Configure an AlphaStor/SmartMedia Jukebox.
>          2) Configure an Autodetected SCSI Jukebox.
>          3) Configure an Autodetected NDMP SCSI Jukebox.
>          4) Configure an SJI Jukebox.
>          5) Configure an STL Silo.
>          6) Configure a Microsoft Removable Storage Jukebox.
>
> What kind of Jukebox are you configuring? [1] 2
>
> There appear to be no SCSI jukeboxes connected to this system.
> This could mean the SCSI jukebox(es) are not connected to the
> system, cannot be seen (pending a reboot) or have already
> been configured.
> On Windows Systems, this could mean that the SCSI jukebox(es)
> are enabled for Microsoft Removable Storage.
>
> Please rerun the program after making the necessary changes.
> **************************************************************
>
>
> Any experience with this???
>
>
> Best regards,
>
> Bruno Madeira
>
> --
> Note: To sign off this list, send a "signoff networker"
> command via email to listserv AT listmail.temple DOT edu or visit
> the list's Web site at
> http://listmail.temple.edu/archives/networker.html where you
> can also view and post messages to the list.
> =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
>

--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=

--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=

<Prev in Thread] Current Thread [Next in Thread>