Re: [Networker] Problem with Legato 6.1.3
2003-07-08 03:05:05
Hi Stan,
I'm having this problem in a similar environment to yours, and was
curious how changing these tcp settings on your Networker server has
helped.
Cheers,
John
> -----Original Message-----
> From: Stan Horwitz [mailto:stan AT TEMPLE DOT EDU]
> Sent: Friday, 4 July 2003 00:15
> To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
> Subject: Re: [Networker] Problem with Legato 6.1.3
>
>
> On Thu, 3 Jul 2003, Donovan O'Brien wrote:
>
> >We were having similar problems for a long time until we
> determined it to
> >be tcp parameters on certain clients. In our instance, we
> had two clients
> >with tcp pararameters configured very small which caused the
> save sessions
> >to close and the devices to go into a "Ready for writing,
> idle" state that
> >would leave the tape drive useless until a restart of the
> associated nsrmmd
> >was performed (sometimes Networker itself had to be cycled).
> When watching
> >from the gui all one would see is a fast backing quickly
> reduced to 60
> >Kb/sec with no increase in data size backed up and eventually the
> >dreaded "Ready for writing, idle". The troublesome clients
> were two HP-UX
> >11.0 systems, below is the values we set to overcome this issue:
> >
> > tcp_keepalive_interval=600000
> > tcp_ip_abort_interval=600000
> > tcp_keepalive_detached_interval=60000
> > tcp_time_wait_interval=720000
> > tcp_ip_abort_cinterval=7200000
> >
> >
> >These may be a bit high if you are worried about security
> but it worked for
> >us. Have not seen it since, our server at the time was
> running 6.1.1.
>
> This is very interesting information. Thank you. I am going to give it
> a try on our Legato server.
>
> --
> Note: To sign off this list, send a "signoff networker"
> command via email
> to listserv AT listmail.temple DOT edu or visit the list's Web site at
> http://listmail.temple.edu/archives/networker.html where you can
> also view and post messages to the list.
> =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
>
--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
|
|
|