Networker

Re: [Networker] Problem with Legato 6.1.3

2003-07-03 05:50:22
Subject: Re: [Networker] Problem with Legato 6.1.3
From: John Gowing <johng AT SOURCECONSULTING.CO DOT ZA>
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Date: Thu, 3 Jul 2003 11:59:36 +0200
Good Day Claudio.

I don't have much to add by way of solution at this point, but can say that
I am having the same/similar problem.
I have a an IBM 3494 Silo with FC attach 3590 drives, also running on 6.1.3
on AIX 5.1.
We experience the problem both with backups and with a cloning operation.
The cloning happens completely on the NW Server, and  thus eliminates the
network as a potential cause.
When the job slows or hangs we see very high utilisation on the associated
NSRMMD task.
Stopping the Job, Killing the NSRMMD concerned, allowing the server to
restart the NSRMMD after the appropriate timeouts etc, and then restarting
the job clears the problem and the job proceeds. However on one occasion
this proceedure Hung Networker and we had to restart the whole Networker
Server.
I have logged a case with Legato on this, will keep you informed.

Any other input would be appreciated.

Regards
John Gowing


----- Original Message -----
From: "Claudio Jaime" <cjaime AT FALABELLA DOT CL>
To: <NETWORKER AT LISTMAIL.TEMPLE DOT EDU>
Sent: Wednesday, July 02, 2003 5:53 PM
Subject: [Networker] Problem with Legato 6.1.3


hi all,

Configuration:
Sever Legato AIX 5.1
Legato Server version 6.1.3, and client
Library L700
SDLT320 drives

Problems: client Windows NT/2000

Backup over the network (100 Mb/s). In some clients the rate of transference
is degraded of 4 Mb/s to 60 Kb/s, after running a little time the process
hang up, with the message "writing". This situation does not permit that the
unit will released, the process remainder in the state until you kill it.
Normally it happens when the backups are full



Atte.
Claudio E. Jaime López
Depto. Ing. de Sistemas
Fono: 56-2-3802938
mailto: cjaime AT falabella DOT cl

--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=

--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=