Networker

Re: [Networker] Netapp NDMP backups with NW7.0 on AIX5.2

2003-06-30 15:27:04
Subject: Re: [Networker] Netapp NDMP backups with NW7.0 on AIX5.2
From: "Shelley L. Shostak" <sls AT QSTECH DOT COM>
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Date: Mon, 30 Jun 2003 12:26:51 -0700
Itzik,

I am having big time problems with NDMP backups and NW7.0.  When I do an NDMP
backup, it seems to work just fine.  But if I start another backup, the tape
gets marked full and there are tons of messages in the daemon.log when it
attempts to mount the tape.  There is no indication of any errors in the
netapp logs.  I get similar errors from the netapp with a variety of messages.
I cannot believe this is a hardware issue, so I will be opening a case with
Legato.  No backups ----> troubled sleep.  I have not even gotten to the point
of trying to read the tapes.

I have a Spectralogic 40 slot/4 drive box with two AIT-2 drives connected to a
Dell 2550 runng redhad and 2 AIT-3 drives connected to the Netapp.

Shelley


06/27/03 17:03:34 nsrd: write completion notice: Writing to volume Q00133 
complete
06/27/03 17:04:09 nsrd: media event cleared: confirmed mount of Q00133 on 
rd=krypton.qstech.com:/dev/nrst2a
06/27/03 17:04:24 nsrd: rd=krypton.qstech.com:/dev/nrst1a Verify label 
operation in progress
06/27/03 17:04:24 nsrmmd #2: ndmp tape bsf failed, I/O error
06/27/03 17:04:42 nsrd: nsrjb notice: nsrjb -j Spectra -Y -O93 -L -g -bNetApp 
Differential -f rd=krypton.qstech.com:/dev/nrst1a -S 37
06/27/03 17:04:42 nsrd: rd=krypton.qstech.com:/dev/nrst1a Verify label 
operation in progress
06/27/03 17:04:53 nsrmmd #2: ndmp tape bsf failed, I/O error
06/27/03 17:05:00 nsrd: rd=krypton.qstech.com:/dev/nrst1a Label without mount 
operation in progress
06/27/03 17:05:17 nsrmmd #5: ndmp tape fsf failed, I/O error
06/27/03 17:05:17 nsrd: media info: 8mm AIT-3 tape Q00024 will be over-written
06/27/03 17:05:17 nsrd: deleted media notice: Deleted volume: volid=3335148545, 
volname=Q00024, location=Spectra
06/27/03 17:05:40 nsrd: /dev/nst1 Eject operation in progress
06/27/03 17:06:21 nsrd: rd=krypton.qstech.com:/dev/nrst1a Eject operation in 
progress
06/27/03 17:06:22 nsrmmd #5: ndmp tape fsf failed, I/O error
06/27/03 17:07:26 nsrmmd #5: ndmp tape fsf failed, I/O error
06/27/03 17:07:26 nsrmmd #5: error, ndmp fsf failed, I/O error

krypton> version
NetApp Release 6.2R2: Mon May 20 17:13:24 PDT 2002
krypton> ndmpd status
ndmpd ON.
No ndmpd sessions active.
krypton> options ndmpd
ndmpd.enable                 on
ndmpd.preferred_interface    disable
krypton> ndmpd version
ndmpd highest version set to: 3
krypton>


* krypton:/vol/vol1/wdata0 NSR server nickel.qstech.com: busy
* krypton:/vol/vol1/wdata0 nsrndmp_save: waiting 30 seconds then retrying
* krypton:/vol/vol1/wdata0 NSR server nickel.qstech.com: busy
* krypton:/vol/vol1/wdata0 nsrndmp_save: waiting 30 seconds then retrying
* krypton:/vol/vol1/wdata0 NSR server nickel.qstech.com: busy
* krypton:/vol/vol1/wdata0 nsrndmp_save: waiting 30 seconds then retrying
* krypton:/vol/vol1/wdata0 NSR server nickel.qstech.com: busy
* krypton:/vol/vol1/wdata0 nsrndmp_save: waiting 30 seconds then retrying
* krypton:/vol/vol1/wdata0 NSR server nickel.qstech.com: busy
* krypton:/vol/vol1/wdata0 nsrndmp_save: waiting 30 seconds then retrying
* krypton:/vol/vol1/wdata0 nsrndmp_save: SYSTEM error: Cannot allocate memory
* krypton:/vol/vol1/wdata0 *****************************************************
*************
* krypton:/vol/vol1/wdata0  ------      E R R O R     -------
* krypton:/vol/vol1/wdata0 Failed to get NDMP username and password for the tape
 server.
* krypton:/vol/vol1/wdata0 *****************************************************
*************
* krypton:/vol/vol1/wdata0 *****************************************************
*************
* krypton:/vol/vol1/wdata0  ------      E R R O R     -------
* krypton:/vol/vol1/wdata0 connect_NDMP returns with error status
* krypton:/vol/vol1/wdata0 *****************************************************
*************



This does not make me particularly happy either:

06/25/03 16:41:06 nsrd: RAP error: there are more NDMP clients connected than
number of NDMP licenses.


On Mon, 30 Jun 2003, Itzik Meirson wrote:

> Date: Mon, 30 Jun 2003 06:16:00 -0700
> From: Itzik Meirson <imeirson AT MBI.CO DOT IL>
> Reply-To: Legato NetWorker discussion <NETWORKER AT LISTMAIL.TEMPLE DOT EDU>,
>      Itzik Meirson <imeirson AT MBI.CO DOT IL>
> To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
> Subject: [Networker] Netapp NDMP backups with NW7.0 on AIX5.2
>
>
> I have configured my new AIX5.2 NW7.0 server to NDMP backup the Netapp
> filer.
> From the savegrp log it seems that the NDMP backup is written to tape,
> however the saveset fails as it seems there is an error during the index
> generation at the end of backup.
> The very cryptic error message is:
> ......
> * netapp:/vol/volo/etc NDMP Service Log: DUMP: 181824 KB
> * netapp:/vol/volo/etc
> * netapp:/vol/volo/etc NDMP Service Log: DUMP: DUMP IS DONE
> * netapp:/vol/volo/etc
> * netapp:/vol/volO/etc NDMP Service Log: DUMP: Deleting
> "/vol/volo/../snapshot_for_backup.7" snapshot.
> * netapp:/vol/volo/etc
> * netapp:/vol/volO/etc NDMP Service Log: MoveletOutput: connection
> closed
> * netapp:/vol/volO/etc
> ******************************************************************
> * netapp:/vol/volO/etc ------       ERROR          ------
> * netapp:/vol/volo/etc Malloc request for 15 bytes failed. Program is
> aborted.
> * netapp:/vol/volo/etc
> ******************************************************************
>
> If I mark "Store index entries: no" on the NDMP pool the backup properly
> finishes but no indexes get generated.
>
> I would appreciate any help with this issue.
> Itzik
>
> *******************************************************************************
> ******************
> The contents of this email and any attachments are confidential.
> It is intended for the named recipient(s) only.
> If you have received this email in error please notify the system manager
> or  the
> sender immediately and do not disclose the contents to any one or make
> copies.
>
> MBI - System Team
> *******************************************************************************
> ******************
>
> --
> Note: To sign off this list, send a "signoff networker" command via email
> to listserv AT listmail.temple DOT edu or visit the list's Web site at
> http://listmail.temple.edu/archives/networker.html where you can
> also view and post messages to the list.
> =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
>
>
>

--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=