Networker

Re: [Networker] NetWorker under Solaris 9

2003-06-13 08:46:51
Subject: Re: [Networker] NetWorker under Solaris 9
From: Jack Lyons <jack.lyons AT MARTINAGENCY DOT COM>
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Date: Fri, 13 Jun 2003 08:46:44 -0400
Have you verified your st.conf settings.  When we upgraded from 5.5.3 to
6.1.3 in February, we also loaded the latest patches for Solaris 7 which
overwrote the st.conf file which cause all sorts of strange scsi errors.

Also, is name resolution correct, the only time I have seen RPC errors are
when their was an issue with our DNS settings.

HTH and good luck
Jack

> -----Original Message-----
> From: Stan Horwitz [mailto:stan AT temple DOT edu]
> Sent: Friday, June 13, 2003 8:33 AM
> To: Jack Lyons
> Cc: 'Legato NetWorker discussion'
> Subject: RE: [Networker] NetWorker under Solaris 9
>
>
> On Fri, 13 Jun 2003, Jack Lyons wrote:
>
> > FWIW: I have been running Networker 6.1.3 on Solaris 7 since Februrary
> '03
> > with no software problems....I have been having hardware problems ever
> since
> > we got the Exabyte Tape library (X200 w/ M2 drives).  When the drives
> are
> > working fine, I have no problems at all.
>
> Our Legato server is is Sun Enterprise 450 with four new LVD SCSI cards.
> One set of three of the Sony AIT-2 tape drives is plugged into one of the
> LVD cards; the other set of three is plugged into a different SCSI card.
> This is in a Qualstar 412600 tape library. The tape drives were all
> working fine prior to migrating to Solaris 9 from Tru64 Unix 4.0f.  I
> recently installed six additional Sony AIT-2 drives in this tape library,
> but they're not enabled yet in Legato and the library setup because I want
> to work out this software problem first.


This email and its contents may be confidential.  If it is and you are not
the intended recipient, please do not disclose or use the information within
this email or its attachments.  If you have received this email in error,
please delete it immediately.  Thank you.

--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=