[Networker] Tape drive problem
2003-06-11 23:20:33
Hi there
I dont if this has cropped up before on this list
We have a Tru64 networker 6.1.1 server with several W2K storage nodes and a
Compaq 5026 jukebox with 2 SDLT tape drives shared amongst them all.
The 2nd tape drive required replacement due to an increasing number of tape
errors occurring.
The drive swap happened - did a 'hwmgr -scan scsi' on the unix box to register
the new tape drive.
However , the W2K servers seem to have lost sight of the replacement drive. A
'Scan for new hardware'
has not fixed the problem. The 'inquire' command shows no file path for the
device .
Are there any procedures required for the W2K nodes to regain the link to the
new device.
Thanks.
#####################################################################################
This e-mail message has been scanned for Viruses and Content and cleared
by MailMarshal
#####################################################################################
****************************************************************************************************************************
CAUTION: This email and any attachments may contain information that is
confidential. If you are not the intended recipient, you must not read, copy,
distribute, disclose or use this email or any attachments. If you have
received this email in error, please notify us and erase this email and any
attachments. You must scan this email and any attachments for viruses.
DISCLAIMER: Powerco Limited accepts no liability for any loss, damage or other
consequences, whether caused by its negligence or not, resulting directly or
indirectly from the use of this email or attachments or for any changes made to
this email and any attachments after sending by Powerco Limited. The opinions
expressed in this email and any attachments are not necessarily those of
Powerco Limited.
****************************************************************************************************************************
--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- [Networker] Tape drive problem,
Steven Frost <=
|
|
|