Networker

Re: [Networker] Problem with jbconfig on Solaris 9

2003-05-14 11:07:11
Subject: Re: [Networker] Problem with jbconfig on Solaris 9
From: Stan Horwitz <stan AT TEMPLE DOT EDU>
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Date: Wed, 14 May 2003 10:03:24 -0400
On Wed, 14 May 2003 lemons_terry AT emc DOT com wrote:

>Hi Stan
>
>Make sure that the block size of the SCSI HBA used on your new Solaris
>NetWorker server is the same as that of your old Tru64 NetWorker Server.

Thanks Terry; How do I check the block size of the SCSI HBA under Solaris?
Isn't that setting controlled by the st.conf file?

>Also, for giggles, try running scanner over the tape in don't-write-to-disk
>mode.  You may want to do this on both your old and new NetWorker servers.
>If you get different results, find out why before moving forward.  It's
>important to fix this now, or you may not be able to read with confidence
>any of your already-written tapes.

Unfortunately, going back to our old Legato server is not an easy option
at this point because we had to rewire the devices in our tape library and
change the dip switches on each of the tape drives to reflect the new
host.

--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=