Re: [Networker] IBM 3584 robotic arm must use lun !

Hi,

Any special reason for that?  I came across at least once where
putting
robotic to LUN 0 solved the problem (with NW+NetApp).  In SAN Legato
also
recommends robotic to be on LUN 0 if I'm not mistaken, but had many
installations with MDR being on 0 and robotic on 1 and no problem at
all.

As for original request, I don't thing You can put it to 1.0.0.
Usually
on that address I always saw CDROM ;).  I believe You can put it to 
1.2.0 (exchange place with tape) by changing how cabling goes.

However, if IBM recommends to have it on LUN 1, I guess there has to
be
a reason (which I would like to hear and know).

Cheers,
Hrvoje

-----Original Message-----
From: Legato NetWorker discussion
[mailto:NETWORKER AT LISTMAIL.TEMPLE DOT EDU] On Behalf Of Itzik Meirson
Sent: Wednesday, May 07, 2003 11:54 AM
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Subject: Re: [Networker] IBM 3584 robotic arm must use lun !


The IBM engineer is right....
The robotics of the jukebox should be addressed by LUN 1.
Itzik

-----Original Message-----
From: Robert Loh [mailto:robert AT SOFTSOURCE.COM DOT SG] 
Sent: Wednesday, 07 May, 2003 05:59 
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Subject: [Networker] IBM 3584 robotic arm must use lun !


Hi All,

I am using AIX 4.3.3 with NW 6.02

the #inquire shown below
[email protected]:IBM     ULT3580-TD1     25D4|Tape
[email protected]:IBM     03584L32        2460|Autochanger (Jukebox)
[email protected]:IBM     ULT3580-TD1     25D4|Tape
[email protected]:IBM     ULT3580-TD1     25D4|Tape
[email protected]:IBM     ULT3580-TD1     25D4|Tape

Actually I want the jukebox to show as [email protected] by using scsi id
0 for autochanger. checking with the IBM engineer as saying that can
not be configured. Is that true ? Just be peculiar here.

cheers...
Robert

--
Note: To sign off this list, send a "signoff networker" command via
email to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can also
view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=

**********************************************************************
****************************
The contents of this email and any attachments are confidential. It is
intended for the named recipient(s) only. If you have received this
email in error please notify the system manager or  the 
sender immediately and do not disclose the contents to any one or make
copies.

MBI - System Team
**********************************************************************
****************************

--
Note: To sign off this list, send a "signoff networker" command via
email to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can also
view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=

--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=