Have a try with nsrstage command. It should do
the work you want.

Have fun,

Thierry

Kind regards - Bien cordialement - Vriendelijke groeten,

Thierry FAIDHERBE

HPCI - Storage & Server Integration Practice 
Tru64 Unix and Legato EBS Consultant
                                   
 *********       *********   HEWLETT - PACKARD
 *******    h      *******   1 Rue de l'aeronef/Luchtschipstraat
 ******    h        ******   1140 Bruxelles/Brussel/Brussels
 *****    hhhh  pppp *****   
 *****   h  h  p  p  *****   100/102 Blv de la Woluwe/Woluwedal
 *****  h  h  pppp   *****   1200 Bruxelles/Brussel/Brussels
 ******      p      ******   BELGIUM
 *******    p      *******                              
 *********       *********   Phone :    +32 (0)2  / 729.85.42   
                             Mobile :   +32 (0)498/  94.60.85 
                             Fax :      +32 (0)2  / 729.88.30   
     I  N  V  E  N  T        Email :    thierry.faidherbe AT hp DOT com
                             Internet : http://www.hp.com/
________________________________________________________________________

MOBISTAR SA/NV 

SYSTEM Team Charleroi, Mermoz 2 Phone : +32 (0)2  / 745.75.81  
Avenue Jean Mermoz, 32          Fax :   +32 (0)2  / 745.89.56  
6041 GOSSELIES                  Email : tfhaidhe AT mail.mobistar DOT be
BELGIUM                         Web :   http://www.mobistar.be/
________________________________________________________________________

  


-----Original Message-----
From: Robert L. Harris [mailto:Robert.L.Harris AT RDLG DOT NET] 
Sent: Tuesday, May 06, 2003 2:11 PM
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Subject: [Networker] Moving SSID's from one file device to another.


I have a machine which needs a filesystem rebuild from one huge 2TB
array to four 512GB arrays.  There is currently 1.2TB on the machine and
I need to spread it across 3 other file devices.  I looked at nsrclone
but it doesn't seem to give the ability to specify target devices which
could potentially cause problems if it tried to copy to a volume
different than I was hoping to get populated.  Is there a better way of
doing this move?  Networker 6.1.2 on a Linux server.

Robert

:wq!
------------------------------------------------------------------------
---
Robert L. Harris                     | PGP Key ID: E344DA3B
                                         @ x-hkp://pgp.mit.edu
DISCLAIMER:
      These are MY OPINIONS ALONE.  I speak for no-one else.

Diagnosis: witzelsucht

IPv6 = robert AT ipv6.rdlg DOT net     http://ipv6.rdlg.net
IPv4 = robert AT mail.rdlg DOT net     http://www.rdlg.net

--
Note: To sign off this list, send a "signoff networker" command via
email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=

--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=