Hi All,

Actually, I have a Dell 136T library with 6 LTO drives attach to a SAN
switch. I have 6 Dynamic Drive Sharing license and 2 storage node licenses.
The legato server is an NT box.

I ran the "jbconfig" command on the networker server and I share all the
devices. I got 6 devices for the legato server (\\.\Tape4 to \\.\Tape9), 6
devices for SRV1 (rd=srv1.tele.qc.ca:\\.\Tape4 to
rd=srv1.tele.qc.ca:\\.\Tape9) and 6 devices for SRV2
(rd=srv2.tele.qc.ca:\\.\Tape4 to rd=srv2.tele.qc.ca:\\.\Tape9). I already
got a library with 4 drives on the networker server (\\.\Tape0 to
\\.\Tape3).

I create a special poll and a special group for those 2 servers (SRV1 and
SRV2). In the devices field of that special poll, as long as I use the
drive \\.\Tape4 to \\.\Tape9 I got no problems but I don't think that it's
backing up with the fiber cable because a poor speed. When I select the
drives rd=srv1.tele.qc.ca:\\.\Tape4 to rd=srv1.tele.qc.ca:\\.\Tape9 and
rd=srv2.tele.qc.ca:\\.\Tape4 to rd=srv2.tele.qc.ca:\\.\Tape9 in the device
fields of that special poll, I get those error messages. Networker is
loading a tape and few seconds after; it's trying to eject the tape and
then I get those messages from the jukebox.

03/18/03 10:06:53 AM nsrd: \\.\Tape3 Eject operation in progress
03/18/03 10:06:56 AM nsrd: media info: unload retry for jukebox `PV136T'
failed - will retry again.
03/18/03 10:06:56 AM nsrd: media info: unload retry for jukebox `PV136T':
sleeping 30 seconds
03/18/03 10:06:56 AM nsrd: media info: unload retry for jukebox `PV136T':
sleeping 30 seconds
?

Anybody can help???

Thanks,

Stef

--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=