On Mon, 10 Mar 2003 16:25:54 -0500, O'Brien, Pat
<Pat.Obrien AT CHOICEPOINT DOT COM> wrote:
>The 2 issue I am having is
>A) nsrjb -d -S slot_number now prompts me to acknowledge empty port,
Add a -N parameter to the command.
> inquire
> [email protected]:DEC TZ89 (C) DEC1837|Tape,
>/dev/ntape/tape0_d1
> [email protected]:DEC TZ89 (C) DEC2150|Tape,
>/dev/ntape/tape1_d1
> [email protected]:DEC TZ89 (C) DEC2561|Tape,
>/dev/ntape/tape2_d1
> [email protected]:ATL TL896 (C) DEC2A5B|Autochanger
>(Jukebox), /dev/changer/mc0
> [email protected]:DEC TZ89 (C) DEC1837|Tape,
>/dev/ntape/tape3_d1
> [email protected]:DEC TZ89 (C) DEC2561|Tape,
>/dev/ntape/tape4_d1
> [email protected]:DEC TZ89 (C) DEC2561|Tape,
This may not be relevant to your problem, but you have quite a mixture of 3
different firmware levels on your tape drives. I don't know how TZ89
firmware levels correspond to DLT7000 levels, but I suspect some of these
are very old. It's probably a good idea to get them all to the same level,
ideally the latest. Might be worth a shot?
--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
|