I'm wondering if you are declaring the correct type of autochanger when
running
jbconfig. Seems like standard SCSI jukebox usually works.

Bob

-----Original Message-----
From: Brian Plume [mailto:brian.plume AT NTH DOT COM]
Sent: Wednesday, February 05, 2003 11:55 AM
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Subject: [Networker] JBCONFIG not making autochanger entry after
finished.


Hi there.

Windows 2000 server, 6.2 Networker, HP ESL 9322 Ultrium LTO Library with
2 drives SAN attached through a Compaq Network Storage Router.

Windows 2000 sees the changer and the two drives in the device manager.
Inquire -l shows all three as well, starting at [email protected] for the
changer, then 14.0.2 and 14.0.3 for the tape drives.

I run jbconfig and run through the questions like normal, entering in my
\\.\Tape0 and \\.\Tape1, but then it asks for a THIRD media device, and
I don't have one.  If I try to enter it anyway, it comes back with no
such device or something.  Then when I go into Networker Administration,
it shows the 2 devices I created, but an autochanger isn't showing up.

Has anyone ever seen anything like this?

Thanks in advance for any information you have....


Brian Plume
Enterprise Storage Architect
Nth Generation Computing, Inc.
Phone:  858-451-2383  Fax:  858-673-8431
"Service and Technology to the Nth Degree"
http://www.nth.com <http://www.nth.com/>


--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=

--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=