Hello,
Anybody find a solution for this?
I cannot install the NetWorker server on The W2K machine. I have the same
error with it.
During installation it stops with message:
Error 1920.Service 'nsrexecd' (nsrexecd)
failed to start. Verify that you have sufficient privileges to
start system services.
After that the installation rolled back ( uninstall ) the previously
installed files.
Thanks,
Milos
Dieter Wick <dieter.wick AT ADD-YET DOT DE> na 08.01.2003 15:06:32
Odpovězte prosím - Legato NetWorker discussion
<NETWORKER AT LISTMAIL.TEMPLE DOT EDU>; Odpovězte prosím - Dieter Wick
<dieter.wick AT ADD-YET DOT DE>
Komu: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Kopie: (Na vědomí: Milos Tremcinsky/ICCC)
Předmět: [Networker] AW: [Networker] Unable to install Networker
Client on NT server
Content-type: text/plain; charset=windows-1250
Content-transfer-encoding: quoted-printable
Hi,
I start nsrexecd in the debug mode witch this output:
C:\Program Files\nsr\bin>nsrexecd.exe -D 9
nsrexecd:
clu_init_lc(): ENTRY...
nsrexecd:
get_lc_fspath_vhost_map(): ENTRY ...
nsrexecd: No access to file: C:\Program Files\nsr\bin\lcmap.bat
...
nsrexecd:
clu_init_lc(): Can't build fspath_vhost_map...
nsrexecd:
dump_map_lc(): ENTRY ...
nsrexecd:
dump_map_lc(): EXIT ...
nsrexecd:
clu_is_cluster_host_lc(): ENTRY ...
nsrexecd: thread started, tid 732
01/06/03 12:01:58 PM nsrexecd: Origin is C:\Program
Files\nsr\bin\
01/06/03 12:01:59 PM nsrexecd: interface addr = 10.1.9.239
01/06/03 12:01:59 PM nsrexecd: OFC driver has not been detected
01/06/03 12:01:59 PM nsrexecd: fullcanon(name=C:\Program
Files\nsr\gui)
01/06/03 12:01:59 PM nsrexecd: exit
fullcanon(fullname=C:\Program Files\nsr\gui)
01/06/03 12:01:59 PM nsrexecd: Adding port range (service):
7937-9936
01/06/03 12:01:59 PM nsrexecd: Adding port range (connection):
10001-30000
01/06/03 12:01:59 PM nsrexecd: port = 21312, res = 0, errno = 22
01/06/03 12:01:59 PM nsrexecd: port = 21313, res = 0, errno =
135
01/06/03 12:01:59 PM nsrexecd: port = 21314, res = 0, errno =
135
01/06/03 12:01:59 PM nsrexecd: port = 21315, res = 0, errno =
135
01/06/03 12:01:59 PM nsrexecd: mondaemon_check count 1
01/06/03 12:01:59 PM nsrexecd: fullcanon(name=C:\Program
Files\nsr\tmp)
01/06/03 12:01:59 PM nsrexecd: exit
fullcanon(fullname=C:\Program Files\nsr\tmp)
01/06/03 12:01:59 PM nsrexecd: checking file ..
01/06/03 12:01:59 PM nsrexecd: checking file ...
01/06/03 12:01:59 PM nsrexecd: checking file nsrla.res.lck.
01/06/03 12:01:59 PM nsrexecd: checking file product.res.lck.
01/06/03 12:01:59 PM nsrexecd: checking file sec.
01/06/03 12:03:09 PM nsrexecd: mondaemon_kill_check: entry
01/06/03 12:04:19 PM nsrexecd: mondaemon_kill_check: entry
I installed the software from official media and I tried install from
the local disk.
The Event Log shows this:
Event Type: Error
Event Source: MsiInstaller
Event Category: None
Event ID: 11920
Date: 1/6/2003
Time: 12:33:36 PM
User: N/A
Computer:
Description:
Product: NetWorker -- Error 1920.Service 'nsrexecd' (nsrexecd)
failed to start. Verify that you have sufficient privileges to
start system services.
I also tried to change the serviceuser during the installation. But all
without success.
Newinstallation is not possible, because the server is an produktive
server.
Regards
Dieter
-----Ursprüngliche Nachricht-----
Von: Legato NetWorker discussion [mailto:NETWORKER AT LISTMAIL.TEMPLE DOT EDU]
Im Auftrag von Faidherbe, Thierry
Gesendet: Montag, 30. Dezember 2002 20:15
An: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Betreff: Re: [Networker] Unable to install Networker Client on NT server
Dieter,
Have a try to start the nsrexecd in debug mode. Maybe debug
output will help you but first idea points to a DNS/host name resolution
problem. Check local <winnt>\system32\drivers\etc\hosts and fill
127.0.0.1 localhost
<IP> Short_name long_name(FQDN)
>From a cmd prompt, issue :
cmd> cd <path_where_you_installed_Networker_sw>
cmd> nsrexecd -D 9
Hope that helps
Thierry
Kind regards - Bien cordialement - Vriendelijke groeten,
Thierry FAIDHERBE
HPCI - Storage & Server Integration Practice
Tru64 Unix and Legato EBS Consultant
********* ********* HEWLETT - PACKARD
******* h ******* 1 Rue de l'aeronef/Luchtschipstraat
****** h ****** 1140 Bruxelles/Brussel/Brussels
***** hhhh pppp *****
***** h h p p ***** 100/102 Blv de la Woluwe/Woluwedal
***** h h pppp ***** 1200 Bruxelles/Brussel/Brussels
****** p ****** BELGIUM
******* p *******
********* ********* Phone : +32 (0)2 / 729.85.42
Mobile : +32 (0)498/ 94.60.85
Fax : +32 (0)2 / 729.88.30
I N V E N T Email : thierry.faidherbe AT hp DOT com
Internet : http://www.hp.com/
________________________________________________________________________
MOBISTAR SA/NV
SYSTEM Team Charleroi, Mermoz 2 Phone : +32 (0)2 / 745.75.81
Avenue Jean Mermoz, 32 Fax : +32 (0)2 / 745.89.56
6041 GOSSELIES Email : tfhaidhe AT mail.mobistar DOT be
BELGIUM Web : http://www.mobistar.be/
________________________________________________________________________
-----Original Message-----
From: Dieter Wick [mailto:dieter.wick AT ADD-YET DOT DE]
Sent: Monday, December 30, 2002 11:18 AM
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Subject: [Networker] Unable to install Networker Client on NT server
Hi,
I am trying to install Networker Client software version 6.2 on a NT
2000
SP 3 server. During installation it stops and displays Evt 1025: Unable
to
start nsrexecd on server. Make sure you have enough priviledges to start
system services. A manually start of the nsrexecd service at this moment
does not work.
I am trying to install it from an local Admin NT account. The Server
has
Oracle 9 installed.
Any one have an idea why nsrexecd cannot be started ? This NT server
has a
static IP and in not part of any domain. Permission on the drive where I
am
trying to install is set for everyone full control. The filesystem is
NTFS.
Also I tried to stop all not nessary servives when I install the Client,
but without success.
Thanks
dieter
--
Note: To sign off this list, send a "signoff networker" command via
email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
--
Note: To sign off this list, send a "signoff networker" command via
email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
|
