Re: [Networker] Networker Command line

nsradmin is about the only CLI for adding a client, but it's curses-based.
 A handy utility to have, but not for the faint-of-heart.

-ty

Phillip T. ("Ty") Young, DMA
Backup/Recovery Systems Mgr.
Network Services Group
i2 Technologies, Inc.




Vikas Saini <vikas AT AGILESTORAGE DOT COM>
Sent by: Legato NetWorker discussion <NETWORKER AT LISTMAIL.TEMPLE DOT EDU>
12/06/2002 04:31 PM
Please respond to Legato NetWorker discussion; Please respond to Vikas
Saini


        To:     NETWORKER AT LISTMAIL.TEMPLE DOT EDU
        cc:
        Subject:        [Networker] Networker Command line


Hi All,
        I need some help about command line utility to do basic networker
configuration stuff like adding a new client, or adding a new device. can
any one help me in that. Also is there any command to do just client
authentication. if so please let me know

Thanks
Vikas


-----Original Message-----
From: Legato NetWorker discussion
[mailto:NETWORKER AT LISTMAIL.TEMPLE DOT EDU]On Behalf Of Myles, Laura M
Sent: Friday, December 06, 2002 1:35 PM
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Subject: Re: [Networker] throughput


same here .. san attached, i.e., using emulex 8000 hba .. we're migrating
to
exchange 2000 and was thinking we should at least get 10.  We're moving to
having more storage groups though so that we can have more than one
stream.
In exchange 2000 you can backup more than one storage group, but not more
than one database within a storage group.

Laura Myles
W:375-2784/C:521-2950
laura.myles AT pnl DOT gov






-----Original Message-----
From: Narkinsky, Brian [mailto:Brian.Narkinsky AT dep.state.fl DOT us]
Sent: Friday, December 06, 2002 1:32 PM
To: Legato NetWorker discussion; Myles, Laura M
Subject: RE: [Networker] throughput


I get about 6 mb/s with DLT7000 SAN attached drives.  That is per
drive/stream.   I usually get 4 streams at a time (one for each storage
group).

Brian

-----Original Message-----
From: Myles, Laura M [mailto:laura.myles AT PNL DOT GOV]
Sent: Friday, December 06, 2002 4:27 PM
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Subject: [Networker] throughput


can someone tell me what throughput rates they're getting when backing up
MSEXCH:
we're using scalar 1000 with LTO drives and are only seeing 4-6MB/s

Laura

--
Note: To sign off this list, send a "signoff" command via email to
listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can also view
and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=

--
Note: To sign off this list, send a "signoff" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=

--
Note: To sign off this list, send a "signoff" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=



--
Note: To sign off this list, send a "signoff" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=