Re: [Networker] tru64 5.1 and tl895 library config question

Hi Pat,

TL895 has no conveyor belt to move tape to an export tray.
I assume you spoke about TL896, 6 drives, 176 Slots. TL895
is 1->7 Drives, 96 Slots and 4 Slots in I/O door.

The behaviour you described may be HW related to the jukebox,
not to the OS. I suggest you to contact your HP (aka Compaq) HW 
Support folks for having a look at the jukebox, 
I have also saw the behaviour with TL893/6, most of the time,
HW caused or belt pressure.

Hope that helps,
Thierry

Kind regards - Bien cordialement - Vriendelijke groeten,

Thierry FAIDHERBE

HPCI - Storage & Server Integration Practice 
Tru64 Unix and Legato EBS Consultant
                                   
 *********       *********   HEWLETT - PACKARD
 *******    h      *******   1 Rue de l'aeronef/Luchtschipstraat
 ******    h        ******   1140 Bruxelles/Brussel/Brussels
 *****    hhhh  pppp *****   
 *****   h  h  p  p  *****   100/102 Blv de la Woluwe/Woluwedal
 *****  h  h  pppp   *****   1200 Bruxelles/Brussel/Brussels
 ******      p      ******   BELGIUM
 *******    p      *******                              
 *********       *********   Phone :    +32 (0)2  / 729.85.42   
                             Mobile :   +32 (0)498/  94.60.85 
                             Fax :      +32 (0)2  / 729.88.30   
     I  N  V  E  N  T        Email :    thierry.faidherbe AT hp DOT com
                             Internet : http://www.hp.com/
________________________________________________________________________

MOBISTAR SA/NV 

SYSTEM Team Charleroi, Mermoz 2 Phone : +32 (0)2  / 745.75.81  
Avenue Jean Mermoz, 32          Fax :   +32 (0)2  / 745.89.56  
6041 GOSSELIES                  Email : tfhaidhe AT mail.mobistar DOT be
BELGIUM                         Web :   http://www.mobistar.be/
________________________________________________________________________

  


-----Original Message-----
From: O'Brien, Pat [mailto:pobrien AT MITIDATA DOT COM] 
Sent: Tuesday, December 03, 2002 11:27 PM
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Subject: [Networker] tru64 5.1 and tl895 library config question


After upgrading the operating system from tru64 v4 to v5, the library
has
developed a small quirk.  Understanding that to perform this os upgrade,
the
library needed to be deleted and re-created due to device naming changes
within the os.  The quirk is that performing a nsrjb -w -some slot will
cause the library to take the tape out of the slot, and put the tape on
the
conveyor belt, but not shift the belt moving the tape to the export
tray.
Functionality does work and has been confirmed with the standard jukebox
commands.  Comparing the 4.x jukebox features definitions to the 5.x
jukebox
features definitions, there are differences, though replicating does not
seem to correct this quirk.  Any ideas what to do next?

--
Note: To sign off this list, send a "signoff" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=

--
Note: To sign off this list, send a "signoff" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=