In Networker 6.x, server's CFI are not backuped together
with the bootstrap. So if you are running nsr6, after restoring
bootstrap (media db (mm subdir) and config (res sub dir)) launch
"nsrck -L 7" and networker will recover your CFI indexes. It's working
quite nice.

HTH,

Thierry


Kind regards - Bien cordialement - Vriendelijke groeten,

Thierry FAIDHERBE

HPCI - Storage & Server Integration Practice 
Tru64 Unix and Legato EBS Consultant
                                   
 *********       *********   HEWLETT - PACKARD
 *******    h      *******   1 Rue de l'aeronef/Luchtschipstraat
 ******    h        ******   1140 Bruxelles/Brussel/Brussels
 *****    hhhh  pppp *****   
 *****   h  h  p  p  *****   100/102 Blv de la Woluwe/Woluwedal
 *****  h  h  pppp   *****   1200 Bruxelles/Brussel/Brussels
 ******      p      ******   BELGIUM
 *******    p      *******                              
 *********       *********   Phone :    +32 (0)2  / 729.85.42   
                             Mobile :   +32 (0)498/  94.60.85 
                             Fax :      +32 (0)2  / 729.88.30   
     I  N  V  E  N  T        Email :    thierry.faidherbe AT hp DOT com
                             Internet : http://www.hp.com/
________________________________________________________________________

MOBISTAR SA/NV 

SYSTEM Team Charleroi, Mermoz 2 Phone : +32 (0)2  / 745.75.81  
Avenue Jean Mermoz, 32          Fax :   +32 (0)2  / 745.89.56  
6041 GOSSELIES                  Email : tfhaidhe AT mail.mobistar DOT be
BELGIUM                         Web :   http://www.mobistar.be/
________________________________________________________________________

  


-----Original Message-----
From: Adkisson, Christopher [mailto:CAdkisson AT BBANDT DOT COM] 
Sent: Tuesday, November 26, 2002 2:34 PM
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Subject: Re: [Networker] Moving /nsr/index in 6.1.2


My problem with this has always been the time it takes to restore the
CFI's.
In version 5, after an mmrecov, I would pull up the nwrecover GUI to
restore
some 250 client file indexes and it would periodically hang and would
take
seemingly forever!

Is this process improved in version 6.x?  If so, I would be inclined to
use
it.

I was planning a test of this in my lab this week.

Christopher Adkisson


 -----Original Message-----
From:   Calvin Thomas [mailto:calvin.thomas AT nacalogistics DOT com]
Sent:   Monday, November 25, 2002 5:13 PM
To:     Legato NetWorker discussion; Adkisson, Christopher
Subject:        Re: [Networker] Moving /nsr/index in 6.1.2

Don't you back them up using networker?  (Hint Hint Hint....)
It would be good practice to simulate a disaster recovery.
Thats what I did.
Calvin Thomas
UNIX System Administrator
NACA Logistics

----- Original Message -----
From: "Chris Adkisson" <cadkisson AT BBANDT DOT COM>
To: <NETWORKER AT LISTMAIL.TEMPLE DOT EDU>
Sent: Monday, November 25, 2002 10:59 AM
Subject: [Networker] Moving /nsr/index in 6.1.2


> Hello all,
>
> Has anyone had success with moving the indexes in Networker 6.1.2?  I
read
> I can move them with UNIX cp command but wanted to ask the field to
see if
> there is a better way.
>
>
> Thanks in advance.
>
> PS - The reason for the move is I'm moving my /nsr directory currently
> mounted on an EMC Sym to another, seperate EMC Sym.
>
> Chris Adkisson
> E4500
> L700
> Solaris 7
> 20 X DLT7000
> 300 clients
> 6TB/week
>
> --
> Note: To sign off this list, send a "signoff" command via email
> to listserv AT listmail.temple DOT edu or visit the list's Web site at
> http://listmail.temple.edu/archives/networker.html where you can
> also view and post messages to the list.
> =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
>

--
Note: To sign off this list, send a "signoff" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=

--
Note: To sign off this list, send a "signoff" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=