Networker

Re: [Networker] Moving /nsr/index in 6.1.2

2002-11-26 10:23:23
Subject: Re: [Networker] Moving /nsr/index in 6.1.2
From: Ty Young <Phillip_Young AT I2 DOT COM>
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Date: Tue, 26 Nov 2002 09:23:18 -0600
Assuming we're talking about the same goal (moving /nsr data from one disk
onto another, right?) I've just used the following procedure:

1.  shut down NetWorker
2.  create a tarball (tape?  disk?  whatever) of /nsr
3.  umount /nsr
4.  create new /nsr and mount it
5.  explode the tarball
6.  re-start NetWorker

So far, I've done this on (I think) six systems, without any problems,
usually with tarballs ranging 15-25 GB.  (In one case, my /nsr fs was 66GB
before I went to tar it up, so I had to use GNUtar instead so that I could
span tapes.  Again, no problem whatsoever.)

-ty

Phillip T. ("Ty") Young, DMA
Backup/Recovery Systems Mgr.
Network Services Group
i2 Technologies, Inc.




Chris Adkisson <cadkisson AT BBANDT DOT COM>
Sent by: Legato NetWorker discussion <NETWORKER AT LISTMAIL.TEMPLE DOT EDU>
11/25/2002 12:59 PM
Please respond to Legato NetWorker discussion; Please respond to Chris
Adkisson


        To:     NETWORKER AT LISTMAIL.TEMPLE DOT EDU
        cc:
        Subject:        [Networker] Moving /nsr/index in 6.1.2


Hello all,

Has anyone had success with moving the indexes in Networker 6.1.2?  I read
I can move them with UNIX cp command but wanted to ask the field to see if
there is a better way.


Thanks in advance.

PS - The reason for the move is I'm moving my /nsr directory currently
mounted on an EMC Sym to another, seperate EMC Sym.

Chris Adkisson
E4500
L700
Solaris 7
20 X DLT7000
300 clients
6TB/week

--
Note: To sign off this list, send a "signoff" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=



--
Note: To sign off this list, send a "signoff" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=