I am experiencing exactly the same problem as Jeff was a couple of years
ago. I run the same software (5.5.3) and use the same hardware right down
to the SCSI cards and am experiencing the same symptoms.
Anyone rememeber what response they sent to Jeff? Or have thoughts on where
to go from here? I'm running the latest firmware, StorageTek has 'verified'
the jukebox and drives, and I've replaced the SCSI cards.

Murray
murray.dietrich AT gov.ab DOT ca

On Tue, 13 Mar 2001 09:34:31 -0500, Jeff Wade <jefwad AT SAFECO DOT COM> wrote:

>Using Networker 5.5.3 and 5.1 patch6, STK 9730's and STK L700, all
>DTL7000's, and Adaptec 2944uw scsi differential cards.
>we are seeing CRC errors on our tapes almost daily somewhere across the
>country.  Wondering if
>any of you have experienced this problem.  We have found that using
>the same dlt tape that the error occurred on with NTBackup, you can
>backup to and restore from all day.. no problems.  These CRC errors will
>destroy any chance of scannering or recovering from via Networker.
>Bad stuff!  StorageTek and Legato are clueless as to why we are seeing
>these.  We have over 50 Legato Servers across the country and they
>all experience the errors at least once a month.
>
>Any idea's please send them directly to my attention!  Much appreciated!!
>
>
>Jeffrey J. Wade
>SAFECO Corporation
>Enterprise Storage and Backup
>Senior Systems Analyst
>+ jefwad AT safeco DOT com
>((425) 376-7093
>È(206) 696-4442 cellular * 2066964442 AT mobile.att DOT net
>
>--
>Note: To sign off this list, send a "signoff" command via email
>to listserv AT listserv.temple DOT edu or visit the list's Web site at
>http://listserv.temple.edu/archives/networker.html where you can
>also view and post messages to the list.
>=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

--
Note: To sign off this list, send a "signoff" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=