Yesterday an ADIC Scalar 1000 tape library was connected via fibre channel
(using Sun's fibre channel card) to a Sun E450 backup host running Solaris
8. (This is the second ADIC Scalar 1000 library that's attached to this
backup host.) The OS sees the new tape library and all of the tape drives
but inquire and jbconfig fail to use the tape library. I'm running Legato
Networker version 6.1.2.
# luxadm probe
No Network Array enclosures found in /dev/es
Found Fibre Channel device(s):
Node WWN:10000060451630e7 Device Type:Tape device
Logical Path:/dev/rmt/5n
Logical Path:/dev/rmt/6n
Logical Path:/dev/rmt/7n
Logical Path:/dev/rmt/8n
Logical Path:/dev/rmt/9n
Logical Path:/dev/rmt/10n
# mt -f /dev/rmt/5cbn status
Quantum DLT7000 tape drive:
sense key(0x0)= No Additional Sense residual= 0 retries= 0
file no= 0 block no= 0
# inquire -l
-l flag found: searching all LUNs, which may take over 10 minutes per
adapter
for some fibre channel adapters. Please be patient.
[email protected]:SEAGATE ST34371W SUN4.2G7462|Disk, /dev/rdsk/c0t0d0s2
[email protected]:EXABYTE EXB-8505SMBANSH20098|Tape, /dev/rmt/0cbn
[email protected]:TOSHIBA XM5701TASUN12XCD2395|CD-ROM, /dev/rdsk/c1t6d0s2
[email protected]:FUJITSU MAB3091S SUN9.0G1505|Disk, /dev/rdsk/c2t0d0s2
[email protected]:SEAGATE ST39204LCSUN9.0G4207|Disk, /dev/rdsk/c2t3d0s2
[email protected]:FUJITSU MAB3091S SUN9.0G2107|Disk, /dev/rdsk/c3t0d0s2
[email protected]:SEAGATE ST39204LCSUN9.0G4207|Disk, /dev/rdsk/c3t1d0s2
[email protected]:QUANTUM DLT7000 2565|Tape, /dev/rmt/4cbn
[email protected]:QUANTUM DLT7000 2561|Tape, /dev/rmt/1cbn
[email protected]:ADIC Scalar 1000 3.00|Autochanger (Jukebox)
[email protected]:QUANTUM DLT7000 2561|Tape, /dev/rmt/2cbn
[email protected]:QUANTUM DLT7000 2565|Tape, /dev/rmt/3cbn
Has anyone else seen this problem? Any suggestions on how to fix this
problem?
Thank you,
Jessica Kelley
--
Note: To sign off this list, send a "signoff" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
|