Hi Robert
It's worth checking that your cleaning cart has not been used up, we had
this ourselves.
A cleaning cart is only good for 20 cleans, BUT! it will still be loaded
untill you change it.
The problem is however is that it does not clean the device, hence the
cleaning light is allways on and constantly requires cleaning.
Another possibility is that you have a dodgy tape in your library, or a
drive head, but it would be unlikely to be on all drives if this was the
case.
Hope this helps
Andrew
Robert Loh wrote:
Anybody encounter this problem. After a data cartridge completed backup
straigh away the drive prompt for cleaning.
After cleaning and continue with another backup, same thing happen and
prompt for cleaning again.
It happens to all 8 x DLT7000 drive in my ATL P3K, thinking the drive might
be sending out wrong signal but how to fix it ?
Configuration
Backup Server = Tru64 OSF1 V4.0 878 alpha, Networker 6.0.2 Build 251
Drive firmware = All in latest 2565
P3K firmware = 1.23
Any other portions should I look into this issue ?
Thanks
Robert
--
Note: To sign off this list, send a "signoff" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
--
Andrew Gascoyne
Unix Administrator
European Southern Observatory
Karl-Schwarzschild-Strasse 2
D-85748 Garching bei Muenchen
Phone: +49 89 32006443
Fax : +49 89 32006380
EMail: agascoyn AT eso DOT org
--
Note: To sign off this list, send a "signoff" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
| 