Hi,
Try to connect the HBA to the SNC directly to avoid any configuration
problem in the FC switch.
Any how, I doupt you can use a GLogic HBA Card to connect to tapr drives.
The QLogic HBA card are for HDS's disk and not for Tape drive. Try to use
an emulex LP8000 HBA card with firmware revision 3.90A7.
Good Luck

--
Note: To sign off this list, send a "signoff" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=