Hello , all
Thank you all for your warm-heart to help me solve this problem
the following is my new found:
after I reboot the Solaris machine with " boot -r " , there has nothing under
the /dev/rmt directory. and then I preform the "#cfgadm -c configure c3"
command , it show the following
error messags:
"cfgadm: Library error: failed to create device node: 2001006451710ee: I/O
error
Operation partially successful. some failures seen"
however , at this time , I found that there have some device files appears
under the /dev/rmt
directory . such like 0, 0cbn ,1 , 1cbn ,etc.
moreover , I have checked the /var/adm/messages , and found the following error
messages:
"
scsi: [ID 243001 kern.warning ] WARNING: /[email protected]/SUNW,qlc@1/fp@0,0(fcp1):
Failed to create node, for pwwn=2001006451710ee; error=5
"
could anyone tell how should I do to found the root reason of the problem?
Thanks in advance.
Thanks again
Eric
----- Original Message -----
From: McLeavey, Ian <Ian.McLeavey AT BLACKDECKER DOT COM>
To: <NETWORKER AT LISTMAIL.TEMPLE DOT EDU>
Sent: Monday, October 21, 2002 11:39 PM
Subject: Re: [Networker] Help!!!!
> Check to seen if you configure storage maps or selective presentation within
> the SNC ( a FC/SCSI bridge I believe ). I have seen similar issues
> with other bridges.
>
> Ian Mcleavey
> Black & Decker
>
> -----Original Message-----
> From: Legato_Networker [mailto:Legato_Networker AT 163 DOT COM]
> Sent: 21 October 2002 12:24
> To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
> Subject: [Networker] Help!!!!
>
>
> Hello , all
>
> Environment :
>
> Host: Sun 280R + solaris 8
> HBA card: Qlogic 2200
> FC switch : brocade 2800
> Tape Library : ADIC scalar 1000 + 2 LTO driver + SNC 5000
> Disk Arrary : HDS
>
>
>
> Problem :
>
> I can see the HDS' disks ,but I can not see the tape library's drivers and
> robot.
> from the /var/adm/messages , I can not see the IBM LTO driver
>
> Does any one can give me a hand ?
>
> Thanks a lot
>
>
>
>
>
>
>
>
> --
> Note: To sign off this list, send a "signoff" command via email
> to listserv AT listmail.temple DOT edu or visit the list's Web site at
> http://listmail.temple.edu/archives/networker.html where you can
> also view and post messages to the list.
> =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
|
