thanks for the quick reply :)

can i get it so that the data is recovered to the
storage node?

scanner -v rd=node1:/dev/rmt/0cbn -x uasm -rv -m
/=/someplace

this would go to the server right?  i would like it to
go to the node.  is that possible?

-RM


--- "Wood, R A (Bob)" <WoodR AT CHEVRONTEXACO DOT COM> wrote:
> Sure, just use the full name of the device
> rd=server:/dev/rmt/0cbn
> rd=server:\\.\Tape0
> Whichever corresponds to your storage node device
>
> Bob
> -----Original Message-----
> From: roger midway [mailto:rogermidway AT YAHOO DOT COM]
> Sent: 16 October 2002 15:36
> To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
> Subject: [Networker] Scanner question
>
> can you use scanner on a storage node?  and what
> would
> the syntax look like?
>
> -RM
>
> --- "Peacock, Tom" <TPeacock AT DETMA DOT ORG> wrote:
> > Roger you should try this on another tape device
> or
> > check your
> > configiguration. I have seen this before and it
> > turned out to be hardware
> > related. Check the st.conf file or try another
> > drive. Also try the scanner
> > on a recent backup volume.  You can scan/recover
> to
> > similar OSes using the
> > method you mention. You also didn't mention the
> type
> > of data you are seeking
> > to recover.  You can scan/recover from UNIX to
> UNIX
> > and UNIX to LINUX using
> > this method.  You cannot scan/recover from UNIX to
> > Windows using your
> > method. To relocate the recovered data use:
> >
> > scanner /dev/rmt/0cbn -x uasm -rv -m /=/someplace
> >
> > And don't forget the -i option to resolve any file
> > conflicts.
> >
> >
> > -----Original Message-----
> > From: roger midway [mailto:rogermidway AT YAHOO DOT COM]
> > Sent: Monday, October 14, 2002 2:25 PM
> > To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
> > Subject: [Networker] scanner with uasm error
> >
> >
> > I am receiving a write failed, Broken pipe error
> > when
> > scanning recovering using scanner.
> >
> > scanner -v /dev/rmt/0cbn -x uasm -rv
> >
> > These tapes are from a different solaris system
> > decommissioned a couple of years ago.
> >
> > Hostname is different, but both hosts are UNIX.
> >
> > Any ideas on the error and is this OK to recover
> > many
> > different systems using scanner and uasm without
> > building the databases?
> >
> > -RM
> >
> > __________________________________________________
> > Do you Yahoo!?
> > Faith Hill - Exclusive Performances, Videos & More
> > http://faith.yahoo.com
> >
> > --
> > Note: To sign off this list, send a "signoff"
> > command via email
> > to listserv AT listmail.temple DOT edu or visit the
> list's
> > Web site at
> > http://listmail.temple.edu/archives/networker.html
> > where you can
> > also view and post messages to the list.
> >
>
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
> >
> > --
> > Note: To sign off this list, send a "signoff"
> > command via email
> > to listserv AT listmail.temple DOT edu or visit the
> list's
> > Web site at
> > http://listmail.temple.edu/archives/networker.html
> > where you can
> > also view and post messages to the list.
> >
>
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
>
>
> __________________________________________________
> Do you Yahoo!?
> Faith Hill - Exclusive Performances, Videos & More
> http://faith.yahoo.com
>
> --
> Note: To sign off this list, send a "signoff"
> command via email
> to listserv AT listmail.temple DOT edu or visit the list's
> Web site at
> http://listmail.temple.edu/archives/networker.html
> where you can
> also view and post messages to the list.
>
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
>
> --
> Note: To sign off this list, send a "signoff"
> command via email
> to listserv AT listmail.temple DOT edu or visit the list's
> Web site at
> http://listmail.temple.edu/archives/networker.html
> where you can
> also view and post messages to the list.
>
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=


__________________________________________________
Do you Yahoo!?
Faith Hill - Exclusive Performances, Videos & More
http://faith.yahoo.com

--
Note: To sign off this list, send a "signoff" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=